On Friday 06 January 2006 21:16, Tyson Varosyan wrote: >Tony, I am going to google away on the MTU thing - I do not even know > what MTU is... However, please note that when I set up routing from > ppp0 to eth1, the computer connected to Eth1 is a web server and is > reachable from outside. I will test to see if the web server can pull > up websites etc... > >Far as setting a lowish MTU, you went way over my head. Can you give > me a bit more of a step-by-step on this? 6th day using Linux :) > MTU is the number of bytes sent in one packet, with 1500 the default. However, by the time things are translated into the dsl protocol, thre are only 1492 bytes left to carry the data, so the common practice is to set the MTU at the interface facing the dsl modem to 1492 rather than the default 1500.
Normally, you can still connect, but it may be noticeably slow due to the packet mangling that must be done to break the data up, and put it back together on the other side. I'd tell you where to edit to set this, but each distro seems to have its own favorite file where this is done. >Thanks, > >Tyson Varosyan >Technical Manager, Uptime Technical Solutions LLC. >[EMAIL PROTECTED] >www.up-times.com >206-715-TECH (8324) > >UpTime/OnTime/AnyTime -- Cheers, Gene People having trouble with vz bouncing email to me should add the word 'online' between the 'verizon', and the dot which bypasses vz's stupid bounce rules. I do use spamassassin too. :-) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2005 by Maurice Eugene Heskett, all rights reserved. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
