Hi I have a little problem with the way USB and hotplug/udev are (not) working on my laptop (It's a Gateway, but i really don't know the model, hopefully I will provide enough info for someone to help me).
The thing is that if I boot the machine with the USB devices already
connected, they are recognized and I can use them. If i unplug them and
plug them again or if I plug them after the boot process, nothing
happens and I can't use them (even the mouse). No modules are loaded,
nothing! Even if I restart the hotplug deamon, it still doesn't work.
I've remove the "legacy devices" thinghy from the BIOS, but the result
is the same.
I'm not really sure what information to provide, so I'm sending as much
info as I can think it is relevant. If anything else is necessary I will
provide it.
I do understand that this a boring problem and as such I understand if i
don't get any anwsers. I've googled arround and found people with
similar problems, but the solutions for them don't even apply. I'm still
actively pursuing an anwser to this, but if someone can help me and put
an end to my misery I would be very thankfull.
Finally, I'm not subscribed to this list (there was a time were i could
keep up with it, but not anymore) so if you could cc the answer to me I
would really appreciate it.
Here goes the info.
LSPCI:
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express
Root Port (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface
Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV41.8 [GeForce Go
6800] (rev a2)
0000:06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705_2
Gigabit Ethernet (rev 03)
0000:06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
0000:06:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
0000:06:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
Host Controller
0000:06:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
0000:06:09.4 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621,
PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
uname -a
Linux namelesstwo 2.6.14.4 #2 PREEMPT Tue Jan 3 14:07:52 WET 2006 i686
GNU/Linux
/etc/debian_version
3.1
dpkg -l udev
ii udev 0.076-6 /dev/ and hotplug management
daemon
I'm sending as an attachment, the .config file from my current kernel.
Besides the mouse I have a Sonyericsson k750i phone and an Toshiba e800 PDA.
I've tried running udevmonitor, but no events are generated. Syslog and
dmesg have nothying either.
Once again, thanks for any help
--
Mario Filipe
[EMAIL PROTECTED]
http://neptuno.sc.uevora.pt/~mjnf
config-2.6.14.4.gz
Description: GNU Zip compressed data
signature.asc
Description: This is a digitally signed message part
