martin f krafft said: > mh, not really, since I cannot connect -- I am in an Internet cafe now. It > receives an LCP packet mentioning CHAP and MD5, then sends one mentioning > CHAP and MD5, then reports the error and tries again several times.
Ah, the wonders of USB sticks... pppd[11426]: pppd 2.4.3 started by madduck, uid 1000 chat[11427]: abort on (BUSY) chat[11427]: abort on (VOICE) chat[11427]: abort on (NO CARRIER) chat[11427]: abort on (NO DIALTONE) chat[11427]: abort on (NO DIAL TONE) chat[11427]: send (ATZ^M) chat[11427]: expect (OK) chat[11427]: ATZ^M^M chat[11427]: OK chat[11427]: -- got it chat[11427]: send (ATDT0718917180110^M) chat[11427]: expect (CONNECT) chat[11427]: ^M chat[11427]: ATDT0718917180110^M^M chat[11427]: CONNECT chat[11427]: -- got it chat[11427]: send (^M) pppd[11426]: Serial connection established. pppd[11426]: using channel 4 pppd[11426]: Using interface ppp0 pppd[11426]: Connect: ppp0 <--> /dev/modem pppd[11426]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x800a298e> <pcomp> <accomp>] pppd[11426]: rcvd [LCP ConfReq id=0x1 <mru 1514> <asyncmap 0x0> <auth chap MD5> <magic 0xcdc9526> <pcomp> <accomp>] pppd[11426]: No auth is possible pppd[11426]: sent [LCP ConfRej id=0x1 <auth chap MD5>] pppd[11426]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x800a298e> <pcomp> <accomp>] pppd[11426]: rcvd [LCP ConfReq id=0x2 <mru 1514> <asyncmap 0x0> <auth eap> <magic 0xcdc9526> <pcomp> <accomp>] pppd[11426]: No auth is possible pppd[11426]: sent [LCP ConfRej id=0x2 <auth eap>] pppd[11426]: rcvd [LCP ConfReq id=0x3 <mru 1514> <asyncmap 0x0> <auth chap MS> <magic 0xcdc9526> <pcomp> <accomp>] pppd[11426]: No auth is possible pppd[11426]: sent [LCP ConfRej id=0x3 <auth chap MS>] pppd[11426]: rcvd [LCP ConfReq id=0x4 <mru 1514> <asyncmap 0x0> <auth pap> <magic 0xcdc9526> <pcomp> <accomp>] pppd[11426]: No auth is possible pppd[11426]: sent [LCP ConfRej id=0x4 <auth pap>] pppd[11426]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x800a298e> <pcomp> <accomp>] pppd[11426]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x800a298e> <pcomp> <accomp>] pppd[11426]: rcvd [LCP ConfReq id=0x5 <mru 1514> <asyncmap 0x0> <auth pap> <magic 0xcdc9526> <pcomp> <accomp>] pppd[11426]: No auth is possible pppd[11426]: sent [LCP ConfRej id=0x5 <auth pap>] pppd[11426]: Terminating on signal 2 pppd[11426]: sent [LCP TermReq id=0x2 "User request"] pppd[11426]: rcvd [LCP TermAck id=0x2] pppd[11426]: Connection terminated. pppd[11426]: Exit. thanks for any help! -martin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
