Hello! tryed to mount a SD card of a Casio photo-camera... without success so far...
my laptop has an inbuild SD-card adapter which is in fact (as i found
out) linked to the pcmcia system...
inserting the card the first time, i got the negation beep...
looking into the log i found :
unknown device...
i added a block to the config file:
card "RICOH Bay1Controller"
version "RICOH", "Bay1Controller"
bind "memory_cs"
and got after that:
Dec 23 11:18:28 shooka cardmgr[6017]: socket 0: RICOH Bay1Controller
Dec 23 11:18:29 shooka kernel: 2.6. kernels use pcmciamtd instead of
memory_cs.c and do not require special
Dec 23 11:18:29 shooka kernel: MTD handling any more.
Dec 23 11:18:29 shooka cardmgr[6017]: executing: 'modprobe memory_cs
2>&1'
Dec 23 11:18:29 shooka cardmgr[6017]: + FATAL: Module memory_cs not
found.
Dec 23 11:18:29 shooka cardmgr[6017]: modprobe exited with status 1
Dec 23 11:18:29 shooka cardmgr[6017]: module
/lib/modules/2.6.14-2-686/pcmcia/memory_cs.o not available
Dec 23 11:18:29 shooka cardmgr[6017]: bind 'memory_cs' to socket 0
failed: Invalid argument
Dec 23 11:18:33 shooka cardmgr[6017]: executing: 'modprobe -r memory_cs
2>&1'
Dec 23 11:18:33 shooka cardmgr[6017]: + FATAL: Module memory_cs not
found.
Dec 23 11:18:33 shooka cardmgr[6017]: modprobe exited with status 1
ok, read the warning that memory_cs is deprecated (would have been nice
having it there anyway....), tryed to locate the pcmciamtd thing...
added to the config file:
device "pcmciamtd"
class "memory" module "pcmciamtd"
and changed in the /etc/pcmcia/ricoh.conf to
card "RICOH Bay1Controller"
version "RICOH", "Bay1Controller"
bind "pcmciamtd"
no luck:
Dec 23 10:47:32 shooka kernel: pcmciamtd: PCMCIA Flash memory card
driver $Revision: 1.51 $
Dec 23 10:47:32 shooka kernel: JEDEC: Found no RICOH Bay1Controller
device at location zero
Dec 23 10:47:32 shooka kernel: CFI: Found no RICOH Bay1Controller device
at location zero
Dec 23 10:47:33 shooka cardmgr[4423]: get dev info on socket 0 failed:
Resource temporarily unavailable
manually stopping the pcmcia system and trying to unload the module
gives:
Dec 23 10:57:40 shooka kernel: ------------[ cut here ]------------
Dec 23 10:57:40 shooka kernel: kernel BUG at
drivers/mtd/maps/pcmciamtd.c:878!
Dec 23 10:57:40 shooka kernel: invalid operand: 0000 [#1]
Dec 23 10:57:40 shooka kernel: Modules linked in: cfi_probe jedec_probe
gen_probe pcmciamtd mtdcore chipreg i915 drm parport_pc lp parport
thermal fan button processor ac battery ipv6 pcmcia sr_mod sbp2 scsi_mod
eth1394 usbhid ipw2200 firmware_class joydev 8139cp ieee80211
ieee80211_crypt ohci1394 ieee1394 8139too yenta_socket rsrc_nonstatic
pcmcia_core mii snd_intel8x0 snd_intel8x0m snd_ac97_codec snd_ac97_bus
snd_pcm_oss snd_mixer_oss i2c_i801 snd_pcm ide_cd snd_timer uhci_hcd
cdrom intel_agp agpgart rtc i2c_core snd soundcore serio_raw pcspkr
usbcore snd_page_alloc ext3 jbd mbcache ide_disk ide_generic generic
piix ide_core evdev mousedev psmouse
Dec 23 10:57:40 shooka kernel: CPU: 0
Dec 23 10:57:40 shooka kernel: EIP: 0060:[pg0+512339930/1069777920]
Not tainted VLI
Dec 23 10:57:40 shooka kernel: EFLAGS: 00010286 (2.6.14-2-686)
Dec 23 10:57:40 shooka kernel: EIP is at exit_pcmciamtd+0x1a/0x24
[pcmciamtd]
Dec 23 10:57:40 shooka kernel: eax: d0eb7c00 ebx: 00000880 ecx:
c01ce720 edx: deb8fad4
Dec 23 10:57:40 shooka kernel: esi: dec63180 edi: 00000000 ebp:
dc856000 esp: dc857f58
Dec 23 10:57:40 shooka kernel: ds: 007b es: 007b ss: 0068
Dec 23 10:57:40 shooka kernel: Process rmmod (pid: 5848,
threadinfo=dc856000 task=d0bf1030)
Dec 23 10:57:40 shooka kernel: Stack: dec62df4 c013508c dec63180
00000880 dc857fa8 636d6370 746d6169 d2370064
Dec 23 10:57:40 shooka kernel: dd731124 d0bdbddc b7f69000
b7f6a000 d0bdbddc d237f280 d237f2b0 b7f69000
Dec 23 10:57:40 shooka kernel: dc856000 c0153700 d237f280
00f69000 00000000 bfd7c4b0 bfd7c4b0 00000003
Dec 23 10:57:40 shooka kernel: Call Trace:
Dec 23 10:57:40 shooka kernel: [sys_delete_module+332/400]
sys_delete_module+0x14c/0x190
Dec 23 10:57:40 shooka kernel: [sys_munmap+80/128]
sys_munmap+0x50/0x80
Dec 23 10:57:40 shooka kernel: [syscall_call+7/11]
syscall_call+0x7/0xb
Dec 23 10:57:40 shooka kernel: Code: e8 fc fe ff ff eb d5 90 90 00 00
00 00 00 00 00 00 83 ec 04 c7 04 24 e0 2d c6 de e8 d1 53 f2 ff a1 c0
32 c6 de 85 c0 75 02 59 c3 <0f> 0b 6e 03 68 11 c6 de 59 c3 00 00 00 00
20 00 50 43 4d 43 49
send a bug report for the kernel 2.6.14-2-686 for that one...
any hint welcome on how to get that card mounted...
--
ciao bboett
==============================================================
[EMAIL PROTECTED]
http://inforezo.u-strasbg.fr/~bboett
===============================================================
signature.asc
Description: Digital signature
