Mark C wrote: > I have woody running perfectly, yet it takes an age to read/write any > files from my nfs server, where as redhat is (for nfs clients anyway) > blistering fast, > > Heres my current mount arguments in /etc/fstab: > loki:/nfs-exports/tmp /pub/tmp nfs nfsvers=2,rsize=4096,wsize=4096,hard,bg 0 0
What does your /etc/exports on your server say? Does it say 'sync' or 'async' for export options? This is a religous issue but you probably want 'async' for performance reasons, 'sync' for belt and suspenders robustness. The default has changed with newer versions in sarge/sid which now make noise unless you specifically pick one so you might as well start choosing now in woody. Something like this: / *(ro,async) /home *(rw,async) > I decided to dual boot with redhat and woody, and do some comparisons, > Copying 1.2GB of data (a single tarball) from client to server Just as an aside you might check out bonnie/bonnie++. A filesystem benchmark performance test. Does a reasonable job of benchmarking perfmance. apt-cache show bonnie++ > Redhat: 15 mins > Woody: 55 mins Gag. I always hate trying to debug those types of things. It furnishes so much ammo for stone throwers all around. But in the end it is all still the same free software base and once figured out both are usually the same. But no fun at all when you are in the thick of it. Guessing you have sync on when in woody and async on when in redhat. Also, check your DMA status. Only applies if you are using IDE drives. SCSI is always DMA. sudo apt-get install hdparm sudo hdparm -d /dev/hda Guess that you have DMA off when in woody but on when in redhat. What does the performance say with it on and off? sudo hdparm -t /dev/hda The easiest way to deal with this probably is the following. Really not using hwtools but it is so easy to use the startup file that I can't resist. sudo apt-get install hwtools sudo editor /etc/init.d/hwtools # ... uncomment / edit the hdparm section # hdparm -q -d1 -m16 /dev/hda Note that just because you turn DMA on does not mean it will stay on. If the kernel gets errors it will switch it off, log the action to syslog, and continue using non-dma. This can happen with some chipsets which have problems. I have one machine like that. Oh well. Bob
pgp00000.pgp
Description: PGP signature
