Hello,
I installed debian 3.1 on server:
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Athlon(tm) 64 Processor 3500+
stepping : 2
cpu MHz : 2199.844
with ViaPro chipset and SATA disks
VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
I switched off raid in Bios and installed Software Raid:
Personalities : [raid0] [raid1] [raid5]
md0 : active raid1 sdb1[1] sda1[0]
497856 blocks [2/2] [UU]
md2 : active raid1 sda3[0] sdb3[1]
4417792 blocks [2/2] [UU]
md1 : active raid1 sdb2[1] sda2[0]
112302272 blocks [2/2] [UU]
unused devices: <none>
If I do software failure it works well:
mdadm /dev/md0 -f /dev/sda1
mdadm: set /dev/sda1 faulty in /dev/md0
md0 : active raid1 sdb1[1] sda1[2](F)
497856 blocks [2/1] [_U]
But if I try to power off a disk (unplug the power cable) the system
freezes. I cannot read /proc/mdstat. The only way to get the system
running is to do restart.
Do I do something wrong when trying hardware fauilure?
Thanks,
Jan Stavel
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
