I wonder if someone has seen this and knows how to solve it. I've been breaking
my head against this problem for a fortnight without success.
I have an updated sid system, kernel 2.6.14-2-686, installed on a Fujitsu
Lifebook E342 laptop. Its BIOS only has APM support. I discovered that ACPI is
enabled by default for this kernel, so I boot it with acpi=off and put apm in
/etc/modules. So far, so good. When I bring the laptop back from a suspended
state, the pcmcia nic is brought back, but the USB devices aren't.
I'd imagine this might have something to do with udev (I have 0.076-3
installed), but I don't know how to delve deeper into this problem. I'd be
immensely grateful if somebody could give me some hint about this, or perhaps a
link to another more appropriate forum to take this issue.
These messages appear on the console when I suspend the laptop:
usb 1-1.4: no poweroff yet, suspending instead
usb 1-1: no poweroff yet, suspending instead
usb usb1: no poweroff yet, suspending instead
after it comes back from suspension:
PCI: Found IRQ 9 for device 0000:00:07.2
PCI: Found IRQ 9 for device 0000:00:07.2
PCI: Found IRQ 9 for device 0000:00:13.0
PCI: Found IRQ 9 for device 0000:00:13.1
eth0: lost link beat
usb 1-1: USB disconnect, address 2
usb 1-1.4: USB disconnect, address 3
eth0: found link beat
eth0: autonegotiation complete: 100baseT-FD selected
lsusb output:
Bus 001 Device 003: ID 045e:0084 Microsoft Corp.
Bus 001 Device 002: ID 05e3:0660 Genesys Logic, Inc. USB 2.0 Hub
Bus 001 Device 001: ID 0000:0000
lspci output:
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) (rev 03)
0000:00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:10.0 Communication controller: Agere Systems 56k WinModem (rev 01)
0000:00:13.0 CardBus bridge: Texas Instruments PCI1221
0000:00:13.1 CardBus bridge: Texas Instruments PCI1221
0000:00:14.0 VGA compatible controller: Trident Microsystems Cyber 9388 (rev d3)
Thanks
Paulo
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
