Okay. I played with some of the mouse settings and was able to get into X but mouse wouldn't work. I googled some and found this from Kent West;
If you're in X, press Ctrl-Alt-F2 to get to the second virtual terminal; if you're not in X, you're fine where you are. "apt-get install gpm" Tell gpm that your mouse is on "/dev/psaux", of type "imps2", and to repeat "raw". After gpm is installed, move the mouse; you should see a white block cursor moving on the screen. If not, run "gpmconfig" and tinker with the settings some more. If you have a USB mouse, the location will be "/dev/input/mice", but you also have to have USB support working, which is another can of worms. Then reconfigure X to use the raw data repeated from gpm. Do this with the command "dpkg-reconfigure xserver-xfree86", and specify "/dev/gpmdata" as the mouse location. You'll need to restart X after this. If you started X with "startx", just switch back to X with (Ctrl-)Alt-F7, and press Ctrl-Alt-Backspace to kill X. If X was started with a tool like kdm or gdm (you had a graphical logon screen), restart that tool with a command like "/etc/init.d/gpm restart" (substitute xdm, wdm, kdm for gdm until it works). Now your mouse should be working. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
