Hi Ken A number of replies to the previous copy of this message were posted to the list. Did you not see them?
Regards Clive On (27/08/05 15:31), Ken Heard wrote: > Hello, > > Since July 2003 I converted to Linux from Windows, using the Red Hat > distro. However, just after I did so Red Hat decided to concentrate on > the "enterprise" market and abandoned individual users to Fedora. I > thereupon decided that when I needed to upgrade to a distro using kernel > 2.6.X I would not use Fedora. > > As I use my computers for my work and consequently had many other > things to do, it took me nearly three years to get around to doing the > upgrading. > > After considerable web research on various distros I decided to try > the > then new Debian 3.1r0a-i386 "Sarge". On 2005-06-15 I downloaded the web > installation iso, burned the CDROM disk using a P4 with RH 8 installed, > and then installed Sarge in another box having a Chaintech mainboard and > a P3 Celeron Coppermine CPU. My window manager in both boxes is KDE; I > did not install Gnome packages in either box. > > After booting -- I thought successfully -- strange things happened > which did not strike me as quite right. For example: > > 1. Printing > > I tried first to use CUPS. However, it would only print pdf, html > and > plain text files from Konqueror. It would not print anything from > Mozilla, nor would it print in terminal mode using the lpr command. I > then tried LPRng, but nothing would print. > > 2. Removable media > > I could not use the 9 cm floppy drive. It took an inordinate time to > mount. When it did, I could not write anything to an empty mounted > floppy. The machine returned the message "disk full". > > Konqueror apparently has provision to unmount and eject CDROMs by > right-clicking on the appropriate file. However this feature did not > work. I discovered that I could only unmount CDROMs in root. > > I also have an internal Zip 750 drive connected to one of the IDE > cables. This drive I could not use at all. > > > There were several other problems, but these will do for now. > Perhaps > the others will disappear if these ones are rectified. > > It did occur to me to look at the syslog to see if there was anything > suspicious there. The following entries struck so me: > (The hatched lines represent other entries not reproduced here.) > --------------------------------------------------------------------------- > SOL kernel: No module symbols loaded -- kernel modules not enabled. > SOL kernel: Linux version 2.6.8.2-386 > > (horms"tabatha.lab.ultramonkey.org)(gcc version 3.3.5 > > (Debian: > 3.3.5-12)) #1 Thu May 19 17:40:50 JST 2005 > --------------------------------------------------------------------------- > SOL kernel: Local APIC disabled by BIOS -- reenabling > SOL kernel: Found and enabled local APIC! > -------------------------------------------------------------------------- > SOL kernel: cpci_hotplug: Compact PCI Hot Plug Core version: 0.2 > pci_hotplug: PCI Hot Plug Core version: 0.5 > shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate_BBN fail=0x5 > shpchp: acpi_shpchprm:.get_device PCI ROOT HIC fail-0x5 > pciehp: acpi_shpchprm:\_SB_.PCI0 evaluate_BBN fail=0x5 > pciehp: acpi_shpchprm:.get_device PCI ROOT HIC fail-0x5 > --------------------------------------------------------------------------- > SOL lpd [1979]: Get_local_host: hostname 'SOL' bad > SOL checkpc [1980]: Get_local_host: hostname 'SOL' bad > --------------------------------------------------------------------------- > SOL rpc.statd [2012]: gethostbyname error for SOL > SOL pcscd: debuglog.c: 135: Debug Log Set Level () debug level=error > -------------------------------------------------------------------------- > SOL kdm_greet [2104 Can't open default user face > SOL kernel: via_audio: ignoring drain playback error -11 > SOL kernel: via_audio: ignoring drain playback error -11 > SOL kernel: via 82 cxxx: timeout while reading AC97 codec (0x9A0000) > SOL kernel: via 82 cxxx: timeout while reading AC97 codec (0x9A0000) > SOL kernel: via 82 cxxx: timeout while reading AC97 codec (0x9A0000) > -------------------------------------------------------------------------- > > I do not know what any of these entries mean, except to say that they > do not look right. > > At this point -- at the end of June 2005 -- I abandoned this > particular > box with an unusable Sarge installation and returned to my RH 8 box to > get some work done. I was unable to return to my Debian installation > problem before last week. > > What I did last week was to take the hda in the P3 box and install it > in the P4 box in place of the hda in the P4 box which had RH 8 installed > on it. On boot up, hotplug installed without error. > > However, another problem occurred. Neither XFree86 nor KDE would > boot. > The boot process left the machine in terminal mode with the shell > octothorpe prompt (#). When I ran the command startx the machine would > not respond. The last message in the boot up log read: > > Fatal server error: > no screens found > > I was nevertheless -- in terminal mode -- able to mount a floppy and > write to it the XFree86 log file. It is appended to the end of this > message, in case it is of any help. > > I did however notice one oddity in this log file. Almost at the end > of > it appears this entry: > > (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, > mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, > mgag400, > mgag550 > > I find this entry suspicious. The P3 Celeron Coppermine box, where I > originally tried to install Sarge, has a Matron AGP video card. It was > possible to run KDE on this box, although there were several features > which would not work, including 1 and 2 above. > > However, the P4 box has Radeon 7500 card, which presumably requires a > different front end. If so, should not Sarge be able to find it? I did > note that earlier in the log file the Radeon card is correctly identified. > > By the way, I was using the same monitor with both boxes (not at the > same time of course) a Philips Brilliance 150P2 TFT, 38 cm size, > 1024x768 resolution. > > At this point, not being very knowledgeable about computers, I do not > know what to do next. If however I cannot get Sarge running reliably I > will probably have to go back to Windows, with all the its problems. I > don't really want to do that, but right now I am desperate. > > Regards, > > Ken Heard > Toronto, Canada > > The text of the XFree86 log file now follows: > ----------------------------------------------------------------------------- > XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219 > [EMAIL PROTECTED]) > Release Date: 15 August 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.4.29-pre2 i686 [ELF] > Build Date: 01 June 2005 > > This version of XFree86 has been extensively modified by the Debian > Project, and is not supported by the XFree86 Project, Inc., in any > way. Bugs should be reported to the Debian Bug Tracking System; see > <URL: http://www.debian.org/Bugs/Reporting >. > > We strongly encourage the use of the "reportbug" package and command > to ensure that bug reports contain as much useful information as > possible. > > Before filing a bug report, you may want to consult the Debian X FAQ: > XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml > plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz > > Module Loader present > OS Kernel: Linux version 2.6.8-2-386 ([EMAIL PROTECTED]) > (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 17:40:50 JST 2005 > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 19 22:55:15 2005 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Generic Monitor" > (**) | |-->Device "Matrox Graphics, Inc. MGA G200 AGP" > (**) |-->Input Device "Generic Keyboard" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc101" > (**) XKB: model: "pc101" > (**) Option "XkbLayout" "ca" > (**) XKB: layout: "ca" > (**) Option "XkbVariant" "deadkeys" > (**) XKB: variant: "deadkeys" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Configured Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. > Entry deleted from font path. > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (WW) Open APM failed (/dev/apm_bios) (No such file or directory) > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.6 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,1a30 card 8086,1a30 rev 03 class 06,00,00 > hdr 00 > (II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 03 class 06,04,00 > hdr 01 > (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 05 class 06,04,00 > hdr 01 > (II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 05 class 06,01,00 > hdr 80 > (II) PCI: 00:1f:1: chip 8086,244b card 8086,2442 rev 05 class 01,01,80 > hdr 00 > (II) PCI: 00:1f:2: chip 8086,2442 card 8086,2442 rev 05 class 0c,03,00 > hdr 00 > (II) PCI: 00:1f:3: chip 8086,2443 card 8086,2442 rev 05 class 0c,05,00 > hdr 00 > (II) PCI: 00:1f:4: chip 8086,2444 card 8086,2442 rev 05 class 0c,03,00 > hdr 00 > (II) PCI: 00:1f:5: chip 8086,2445 card 414c,4710 rev 05 class 04,01,00 > hdr 00 > (II) PCI: 01:00:0: chip 1002,5157 card 174b,7146 rev 00 class 03,00,00 > hdr 00 > (II) PCI: 02:09:0: chip 127a,1005 card 127a,1005 rev 01 class 07,00,00 > hdr 00 > (II) PCI: 02:0b:0: chip 1186,1300 card 1186,1300 rev 10 class 02,00,00 > hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B] > [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B] > [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] > [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is > cleared) > (II) Bus 2 I/O range: > [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B] > [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B] > [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B] > (II) Bus 2 non-prefetchable memory range: > [0] -1 0 0xee000000 - 0xee0fffff (0x100000) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) > (--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV200 QW [Radeon 7500] rev > 0, Mem @ 0xe0000000/27, 0xed000000/16, I/O @ 0x9000/8 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to > 0xe7ffffff > (II) Active PCI resource ranges: > [0] -1 0 0xee010000 - 0xee0100ff (0x100) MX[B] > [1] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] > [2] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O > [3] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) > [5] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [6] -1 0 0x0000c000 - 0x0000c03f (0x40) IX[B] > [7] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B] > [8] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] > [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > [10] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [12] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xee010000 - 0xee0100ff (0x100) MX[B] > [1] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] > [2] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O > [3] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) > [5] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [6] -1 0 0x0000c000 - 0x0000c03f (0x40) IX[B] > [7] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B] > [8] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] > [9] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > [10] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [11] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [12] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xee010000 - 0xee0100ff (0x100) MX[B] > [6] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] > [7] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O > [8] -1 0 0xed000000 - 0xed00ffff (0x10000) MX[B](B) > [9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [12] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] > [13] -1 0 0x0000c000 - 0x0000c03f (0x40) IX[B] > [14] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B] > [15] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] > [16] -1 0 0x00000500 - 0x0000050f (0x10) IX[B] > [17] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B] > [18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B] > [19] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B) > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": > No symbols found > Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": > No symbols found > Skipping > "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No > symbols found > Skipping > "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No > symbols found > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) LoadModule: "bitmap" > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Loading font Bitmap > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 2.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font FreeType > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Loading extension GLX > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No > symbols found > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "mga" > (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o > (II) Module mga: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, > mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400, > mgag550 > (II) Primary Device is: PCI 01:00:0 > (EE) No devices detected. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
