Hi, I built sarge on an IBM X330. System specs, IBM X330, dual 1GHz PIIIs, 1GB RAM, dual 36GB u160 SCSI cards on a ServerRAID 4Lx, configured for mirroring. BIOS version 1.04, ServerRAID version 7.00.
I installed sarge on the machine, but when I tried to boot the linux26 kernel, it wouldn't boot. I ended up installing 2.4.27-10, and the install went fine. I then downloaded kernel-source-2.6.11 and compiled my own kernel (since it was to be a firewall, I had planned to do that anyway, not to mention enabling the second CPU.) At this point, I completed configuration remotely from my laptop. Today, however, I took it to the colo site, racked and cabled it (using a daisy chain cable from another X330), and found that console keyboard works fine up until the point where I select 2.6.11, then immediately stops working. If I boot 2.4.27, it works fine. Can anybody tell me right off the top of their heads what I am missing in the 2.6 configuration or if there is something different with 2.6 that is stopping it from working? (Since the linux26 option in the build should be a generic kernel similar to the 2.4 on the build CD, it should work fine...) TIA, -- --Brad ======================================================================== Bradley M. Alexander | IA Analyst, SysAdmin, Security Engineer | storm [at] tux.org ======================================================================== Key fingerprints: DSA 0x54434E65: 37F6 BCA6 621D 920C E02E E3C8 73B2 C019 5443 4E65 RSA 0xC3BCBA91: 3F 0E 26 C1 90 14 AD 0A C8 9C F0 93 75 A0 01 34 ======================================================================== I couldn't repair your brakes, so I made your horn louder. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
