On Mon, 22 Aug 2005 11:32:52 +0200 "Louis Swart" <[EMAIL PROTECTED]> wrote:
> Hi, > > I have a Debian GNU/Linux 3.1 Intel x86 installation that has pppd version > 2.4.3. > > I have a GPRS modem connected to /dev/ttyS0. > I can connect and get a ppp0 interface. > When I unplug the GPRS modem from the serial port I can > see the modem signals change state including CD (Carrier Detect): > > >From : 0: uart:16550A port:000003F8 irq:4 tx:2276 rx:2864 RTS|CTS|DTR|DSR|CD > To : 0: uart:16550A port:000003F8 irq:4 tx:2329 rx:2911 CTS|DSR > > But pppd does not close the connection and the ppp0 interface remains > available. > > If I do the same test on Fedora Core 3 that has pppd version 2.4.2 all works > 100%. > > Can anyone confirm this and possibly give a solution? > > I have tried different combinations of "crtscts", "cdtrcts" and "modem" with > no good result. > > Thanks, > > Louis. Use <top> to discover the pid and then kill it, or maybe try poff before you disconnect? Just thinking aloud. -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If we were left solely to the wordy wit of legislators in Congress for our guidance, uncorrected by the seasonal experience and the effectual complaints of the people, America would not long retain her rank among the nations. .......................................Henry David Thoreau ########################### Trying a Linux Debian Sarge System -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
