On Friday 12 Aug 2005 12:03, TreeBoy wrote: > The instructions I followed were: > > http://linux-usb.sourceforge.net/SpeedTouch/docs/sargehowto.html > > However, you do *not* need to do configure the kernel. > > You *do* need to "apt-get install speedtouch"! > > You do *NOT* need to install hotplug - 'cos it's already there. > > You *do* need to get the firmware! > > You do not need to install the hotplug script the "apt-get install > speedtouch" inserts that for you. > > You need to configure PPPoA and create your /etc/pppp/peers/ file. I called > mine "demon" and it looks like this: > > debug > lcp-echo-interval 10 > lcp-echo-failure 3 > noipdefault > defaultroute > user "[EMAIL PROTECTED]" > noauth > noaccomp > nopcomp > noccp > novj > holdoff 4 > persist > maxfail 25 > updetach > #usepeerdns > plugin pppoatm.so > 0.38 > > > Notice that I have commented out "usepeerdns" this is because of other > parts of my setup. > > Next, you *do* need to setup chap-secrets and pap-secrets with your > details. > > libatm1 should be installed as a dependency of speedtouch. > > That should be it - now just "Plug and Play"! > > Good luck. > > TreeBoy
Some of this may not be necessary if you are running a >2.6.10 kernel. This explains: http://www.debianhelp.org/module-pnForum-viewtopic-topic-9551-start-0.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
