---------------------------- Original Message ----------------------------
apols for sending only to Sebestian before. M.
--------------------------------------------------------------------------
>> > > > Anybody out there successfully used a US
>> > Robotics
>> > > > 33.6k Sportster voice
>> > > > fax-modem with wvdial? If so can you send me
>> > your
>> > > > wvdial.conf (the AT
>> > > > codes part) since my (auto-setup) of the
>> > > > configuration hangs when it
>> > > > dials with 'waiting for carrier'
>> > > >
>> > > > thanks
>> > > Hello Michel,
>> > >
>> > > Did you try wvdialconf?
>> > > if not try it, it configure your modem
>> > atomatically.
>> >
>> > I believe the installation of wvdial ran this (it
>> > definitely did some
>> > configuration)... but the init strings in the
>> > wvdial.conf don't seem to
>> > work....
>> Yeah I understand that part, but there is a command
>> wvdialconf that generates a new wvdial.conf file if
>> you run it it will configure your modem.
>> Then run as root
>> #wvdialconf
I put myself in group 'dialout' then tried wvdialconf but to no avail (see
below). You've def got this going with Robotics 33.6 Sportster? What's in
your deb.conf? Thanks, Michael
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- OK
ttyS0<*1>: ATQ0 V1 E1 Z -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- ΓΏ&C1
ttyS0<*1>: ATQ0 V1 E1 S0=0 &D2 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &D2 +FCLASS=0 -- OK
ttyS0<*1>: Modem Identifier: ATI -- 3361
ttyS0<*1>: Speed 4800: AT -- OK
ttyS0<*1>: Speed 9600: AT -- OK
ttyS0<*1>: Speed 19200: AT -- OK
ttyS0<*1>: Speed 38400: AT -- OK
ttyS0<*1>: Speed 57600: AT -- OK
ttyS0<*1>: Speed 115200: AT -- OK
ttyS0<*1>: Max speed is 115200; that should be safe.
ttyS0<*1>: ATQ0 V1 E1 S0=0 &D2 +FCLASS=0 -- OK
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2 S3
ttyACM0<Info>: Invalid argument
Port Scan<*1>: ACM0
ttyACM1<Info>: Invalid argument
Port Scan<*1>: ACM1
ttyACM2<Info>: Invalid argument
Port Scan<*1>: ACM2
ttyACM3<Info>: Invalid argument
Port Scan<*1>: ACM3
ttyACM4<Info>: Invalid argument
Port Scan<*1>: ACM4
ttyACM5<Info>: Invalid argument
Port Scan<*1>: ACM5
ttyACM6<Info>: Invalid argument
Port Scan<*1>: ACM6
ttyACM7<Info>: Invalid argument
Port Scan<*1>: ACM7
ttyACM8<Info>: Invalid argument
Port Scan<*1>: ACM8
ttyACM9<Info>: Invalid argument
Port Scan<*1>: ACM9
ttyACM10<Info>: Invalid argument
Port Scan<*1>: ACM10
ttyACM11<Info>: Invalid argument
Port Scan<*1>: ACM11
ttyACM12<Info>: Invalid argument
Port Scan<*1>: ACM12
ttyACM13<Info>: Invalid argument
Port Scan<*1>: ACM13
ttyACM14<Info>: Invalid argument
Port Scan<*1>: ACM14
ttyACM15<Info>: Invalid argument
Port Scan<*1>: ACM15
ttyUSB0<Info>: No such device or address
Port Scan<*1>: USB0
ttyUSB1<Info>: No such device or address
Port Scan<*1>: USB1
ttyUSB2<Info>: No such device or address
Port Scan<*1>: USB2
ttyUSB3<Info>: No such device or address
Port Scan<*1>: USB3
ttyUSB4<Info>: No such device or address
Port Scan<*1>: USB4
ttyUSB5<Info>: No such device or address
Port Scan<*1>: USB5
ttyUSB6<Info>: No such device or address
Port Scan<*1>: USB6
ttyUSB7<Info>: No such device or address
Port Scan<*1>: USB7
ttyUSB8<Info>: No such device or address
Port Scan<*1>: USB8
ttyUSB9<Info>: No such device or address
Port Scan<*1>: USB9
ttyUSB10<Info>: No such device or address
Port Scan<*1>: USB10
ttyUSB11<Info>: No such device or address
Port Scan<*1>: USB11
ttyUSB12<Info>: No such device or address
Port Scan<*1>: USB12
ttyUSB13<Info>: No such device or address
Port Scan<*1>: USB13
ttyUSB14<Info>: No such device or address
Port Scan<*1>: USB14
ttyUSB15<Info>: No such device or address
Port Scan<*1>: USB15
Found a modem on /dev/ttyS0.
Modem configuration written to /etc/wvdial.conf.
ttyS0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &D2 +FCLASS=0"
19:59:05 ~$ wvdial
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT08456653000
--> Waiting for carrier.
ATDT08456653000
{and nothing happens so I do a cntl-c)
Caught signal #2! Attempting to exit gracefully...
--> Disconnecting at Fri Aug 5 19:59:21 2005
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
