On Sat, 05 Apr 2003 the mental interface of Alan Chandler told: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > In order to play dvds on my ide dvd player I am told I have to load ide-scsi > module and link /dev/dvd to the device that represents. How can I find out > which device that is? > > My dvd rom device is hdd - as shown here > > kanger:/proc/ide/ide1/hdd# more model > Pioneer DVD-ROM ATAPIModel DVD-104S 020 > > I have added append hdd=ide-scsi in my lilo config and this module is > definately loaded. If I look in /proc/scsi there is a subdirectory called > ide-scsi and a single file in it named "1" with the following text "SCSI host > adapter emulation for IDE ATAPI devices". > > On my system I have a real scsi bus with a cd writer on it, plus a usb smart > media reader. When I look in the file /proc/scsi/scsi it lists these two but > NOT the ide-scsi device - thus > > [EMAIL PROTECTED]:/proc/scsi$ more scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 03 Lun: 00 > Vendor: TEAC Model: CD-R55S Rev: 1.0J > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: eUSB Model: SmartMedia Rev: 5.04 > Type: Direct-Access ANSI SCSI revision: 02 > > > I tried linking /dev/dvd to /dev/scd1
cat /proc/scsi/scsi must show your scsi emulated dvd player. So try modprobe ide-scsi (check with lsmod | grep ide-s) and do a link from ln -s /dev/scd2 /dev/dvd. I suppose scd0 is your burner and scd1 is your card-reader. To load ide-scsi on every boot put a single line ide-scsi in you /etc/modules. HTH Ciao Elimar -- Never make anything simple and efficient when a way can be found to make it complex and wonderful ;-)
pgp00000.pgp
Description: PGP signature
