Well finally I solved the problem. I downloaded kernel 2.6.12 from http://kernel.org, compiled it and everithing works.
BTW, how can I see the debug output messages from a module? On 7/18/05, Anders Breindahl <[EMAIL PROTECTED]> wrote: > On Monday 18 July 2005 08:47, L.V.Gandhi wrote: > > On 7/17/05, Andras Lorincz <[EMAIL PROTECTED]> wrote: > > > Hi, > > > > > > I'm using debian sarge with kernel 2.6.8. I have problem getting sound > > > to work for my tv tuner which is Pinnacle Pctv stereo with saa7134 > > > chipset. I have the internal audio connector connected to Aux in on my > > > sound card. I can get the picture but there is no sound, just a > > > background noise. When installing the modules I do this: > > > > > > #modporbe bttv card=1 > > > #modprobe tuner type=5 > > > #modprobe saa7134 > > > > > > Thanks in advance for your help. > > > > see the kmix/alsamixer for line. Whether it is turned on and vol is > > atleast 50% > > Excuse me for reusing the thread. > I am in some sort of the same problem. I have a cheap framegrabber-card > (saa7134 insmod option card=37, exactly), and audio is supposed to be input > to my via82xx-onboard soundcard. > However, as a means of debugging, I tried putting my in-ear headphones into > the audio-out-jack of the tunercard, and heard absolutely nothing. I tried > started and stopping tvtime, seeing how saa7134's debugging output reported > the audio to be unmuted and muted accordingly, but nothing helped. > > That's not supposed to happen, right? Normally, the output impedance of > line-out-connections is close enough to that of a headphone-out, so one would > expect to hear something. Or am I missing something? > > Regards, Anders Breindahl. > > >
