Hello,
I don't get IP-Aliasing to work. The machine has got one interface
(eth0) working correctly with ip=192.168.1.1
Issuing the commands
ifconfig eth0:1 192.168.1.100
route add -host 192.168.1.100 dev eth0:1
brings the interface eth0:1 up, but I can't ping it from the same
machine or other ones.
An odd thing I noticed is the ifconfig output:
eth0 Protokoll:Ethernet Hardware Adresse 00:0B:6A:78:EB:25
inet Adresse:192.168.1.66 Bcast:192.168.1.255
Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27843 errors:0 dropped:0 overruns:0 frame:0
TX packets:28857 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:2944191 (2.8 MiB) TX bytes:17241905 (16.4 MiB)
Interrupt:11 Basisadresse:0xd400
eth0:1 Protokoll:Ethernet Hardware Adresse 00:0B:6A:78:EB:25
inet Adresse:192.168.1.100 Bcast:192.168.1.255
Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:11 Basisadresse:0xd400
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:339 errors:0 dropped:0 overruns:0 frame:0
TX packets:339 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:144621 (141.2 KiB) TX bytes:144621 (141.2 KiB)
It doesnt show the RX/TX etc. lines for the eth0:1.
Could someone give me a hint on how to do it right?
Thanks, Frank.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
