Hi, I'm not a very experienced user. I was using Debian Woody on a machine containing an integrated Promise FastTrak 100 Lite controller in RAID1 (MSI Pro266TD Master-LR motherboard). I tried to install Debian Sarge on this hardware, but it looks like it doesn't detect this hardware correctly. When I start the woody installation with the 2.4 kernel I get the following devices at the disk drive configuration: /dev/ataraid/d0 /dev/hdg /dev/hde
selecting the first one installs the system correctly. When I tried this with sarge (2.4 kernel, 2.6 kernel, doesn't mather) I get the following devices at the disk drive configuration: IDE5 master (hde) IDE6 master (hdg) It looks like, that the installer only detect the bare drives, but not the raid controller. If I choose one of the drives it install the system but I get a kernel panic on the first system start. Can anybody tell me how can I install sarge on the configuration above? Thank you in advance Zoltan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
