On Sat, 25 Jun 2005 01:36:25 +0100 Branden Faulls <[EMAIL PROTECTED]> wrote:
> > Enabling DMA with hdparm -d1 /dev/scd0 fails.How do I remove > ide-scsi, or is there a way to set the DMA using the udev > rules? Udev is new to me, should I be using it at all? 2.6.x has a vastly different ide interface with respect to dvd/cdrw drives than 2.4x. I'm not sure if your drives are scsi or ide, but I'll assume IDE. If so, you'll want to discontinue using ide-scsi and use direct drive instead - like /dev/hdc or /dev/hdd. You should prabalby also remove references to ide-scsi in your lilo/grub append line because they're no longer necessary with 2.6.x kernels. hth > Branden -- ------------------------------------------------------------------------ David E. Fox Thanks for letting me [EMAIL PROTECTED] change magnetic patterns [EMAIL PROTECTED] on your hard disk. ----------------------------------------------------------------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
