I don't remeber the start of this thread, but is this link what you need? http://kalamazoolinux.org/tech/ns-wheel.html
On Friday 28 June 2002 2:28 am, James Hook wrote: > G'Day, > > On Wed, 26 Jun 2002, Bob Proulx wrote: > > > With a PS/2 MS Intellimouse and XF86 4.* imwheel is not needed. The > > > therefore has to do with Netscape 4.* and/or its config files. > > > > I think you are on top of things. But does netscape 4.77 support the > > mouse wheel? I did not think so. If you can go to a newer version or > > Mozilla or Galeon or something newer then I believe it will have mouse > > wheel support. I think netscape 4.77 is just too old for that. I > > Correction, 4.77 supports the mouse wheel, just takes a bit of manual > modification. > > I run 'Netscape 4.77 [en]-20010326' here, at first I got a bit annoyed > because I could not use the mouse wheel and switched browsers. But due to > testing reasons I still needed netscape. After a bit of searching I found > A working .xdefaults config that worked fine. > > Heres a copy of the text file I **created** (it didnt exist) in my home > dir: > -- 8<-- > !## NETSCAPE > Netscape*drawingArea.translations: #replace \ > <Btn1Down>: ArmLink() \n\ > <Btn2Down>: ArmLink() \n\ > ~Shift<Btn1Up>: ActivateLink() \n\ > ~Shift<Btn2Up>: ActivateLink(new-window) \ > DisarmLink() \n\ > Shift<Btn1Up>: ActivateLink(save-only) \ > DisarmLink() \n\ > Shift<Btn2Up>: ActivateLink(save-only) \ > DisarmLink() \n\ > <Btn1Motion>: DisarmLinkIfMoved() \n\ > <Btn2Motion>: DisarmLinkIfMoved() \n\ > <Btn3Motion>: DisarmLinkIfMoved() \n\ > <Motion>: DescribeLink() \n\ > <Btn3Down>: xfeDoPopup() \n\ > <Btn3Up>: ActivatePopup() \n\ > Ctrl<Btn4Down>: PageUp()\n\ > Ctrl<Btn5Down>: PageDown()\n\ > Shift<Btn4Down>: LineUp()\n\ > Shift<Btn5Down>: LineDown()\n\ > None<Btn4Down>: LineUp()LineUp()LineUp()LineUp()LineUp()LineUp()\n\ > None<Btn5Down>: > LineDown()LineDown()LineDown()LineDown()LineDown()LineDown() > \n\ > Alt<Btn4Down>: xfeDoCommand(forward)\n\ > Alt<Btn5Down>: xfeDoCommand(back)\n > > Netscape*globalNonTextTranslations: #override\n\ > Shift<Btn4Down>: LineUp()\n\ > Shift<Btn5Down>: LineDown()\n\ > None<Btn4Down>:LineUp()LineUp()LineUp()LineUp()LineUp()LineUp()\n\ > None<Btn5Down>:LineDown()LineDown()LineDown()LineDown()LineDown()LineDown() >\ n\ > Alt<Btn4Down>: xfeDoCommand(forward)\n\ > Alt<Btn5Down>: xfeDoCommand(back)\n > -- 8<-- > > Hope that helps out in the problem. > BTW: I run X4, with a USB IntelliMouse set up in XF86Config-4 like this: > -- 8<-- > Section "InputDevice" > Identifier "Optical Mouse" > Driver "mouse" > Option "CorePointer" > # Option "Device" "/dev/input/mice" > Option "Device" "/dev/gpmdata" > # Option "Protocol" "ImPS/2" > Option "Protocol" "ExplorerPS/2" > Option "ZAxisMapping" "6 7" > Option "Buttons" "7" > EndSection > -- 8<-- > > Cheereo, -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
