On Wed, 19 Jun 2002, Seneca wrote: > On Wed, Jun 19, 2002 at 03:09:06PM +0530, Dr. Sharukh K. R. Pavri. wrote: > > I have just installed woody and am running into a few errors on boot up: > > > > --------------------------------------- > > insmod: modprobe: cannot create /var/log/ksymoops/20020619.log Read-only > > file system > > insmod: /lib/modules/2.2.19/misc/unix.o: cannot create > > /var/log/ksymoops/20020619202417.ksyms Read-only file system > > insmod: /lib/modules/2.2.19/misc/unix.o: cannot create > > /var/log/ksymoops/20020619.log Read-only file system > > ---------------------------------------- > > > > how do I get rid of this ? I have one large partition as / and one > > partition as /home. > > What is the output from mount and dmesg, and what is your fstab like? >
Okay here goes: mount: /dev/hda3 on / type ext2 (rw,errors=remount-ro,errors=remount-ro) proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/hda8 on /home type ext2 (rw) ---------------------------------------------------------- dmesg: Linux version 2.2.19 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat Sep 22 22:$BIOS-provided physical RAM map: BIOS-e820: 0009fc00 @ 00000000 (usable) BIOS-e820: 00000400 @ 0009fc00 (usable) BIOS-e820: 02f00000 @ 00100000 (usable) Detected 121707 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 242.48 BogoMIPS Memory: 45984k/49152k available (1752k kernel code, 412k reserved, 848k data, 1$Dentry hash table entries: 8192 (order 4, 64k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium 75 - 200 stepping 05 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfb230 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 65536 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 PIIX3: IDE controller on PCI bus 00 dev 39 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio hda: ST38421A, ATA DISK drive hdb: ST31277A, ATA DISK drive hdc: ASUS CD-S500/A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ST38421A, 8056MB w/256kB Cache, CHS=1027/255/63 hdb: ST31277A, 1221MB w/0kB Cache, CHS=2482/16/63 hdc: ATAPI 50X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi: <fdomain> Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 Failed initialization of WD-7000 SCSI card! IBM MCA SCSI: Version 3.2 IBM MCA SCSI: No Microchannel-bus present --> Aborting. This machine does not have any IBM MCA-bus or the MCA-Kernel-support is not enabled! megaraid: v1.11 (Aug 23, 2000) aec671x_detect: 3w-xxxx: tw_findcards(): No cards found. scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: [PTBL] [620/64/63] hdb1! < hdb5 hdb6 hdb7 hdb8 > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) apm: disabled on user request. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 156k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 160608k swap-space (priority -1) CSLIP: code copyright 1989 Regents of the University of California PPP: version 2.3.7 (demand dialling) PPP line discipline registered. PPP Deflate Compression module registered PPP BSD Compression module registered -------------------------------------------------------- fstab: # <file system> <mount point> <type> <options> # <dump> <pass> /dev/hda3 / ext2 defaults,errors=remount-ro 01 /dev/hda6 none swap sw 0 0 proc /proc proc defaults 00 /dev/fd0 /floppy auto defaults,user,noauto 00 /dev/cdrom /cdrom iso9660 defaults,ro,user,noauto 00 /dev/hda8 /home ext2 defaults 0 2 ---------------------------------------------------------- regards, Sharukh. -- Dr. Sharukh K. R. Pavri Homeopath and Linux Enthusiast. Mumbai, India. http://www.pavri.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
