On Sat, May 11, 2002 at 11:10:02PM +0200, MM wrote:
> Next step was to connect this two computers. On 386 network card was
> installed at the time of installation and was successfully recognized. On
> my other home computer there was no net card at the time of installation so
> I added it later, kernel recognized it and then I configured all network
> parameters and save them in appropriate files. But network is not working
> upon boot. I have to enter ipconfig eth0 192.168.0.1 every time to get it
> working. What commands and where should I put to get network working after
> boot?
Investigate /etc/network/interfaces (man interfaces). Something like
this should work:
auto eth0
iface eth0 inet static
address 192.168.0.1
network 192.168.0.0
netmask 255.255.255.0
broadcast 192.168.0.255
--
Colin Watson [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
