Hello all, I have a Cyberpower 1250AVR connected to /dev/ttyS1 on my up-to-date Sid maching running nut. When I run "/etc/init.d/nut start" the shell just hangs with-
Starting Network UPS Tools: I need to break out with <Ctrl-C> to get back to the shell. Then I get the remaing- Starting Network UPS Tools: /lib/nut/cyberpower-ttyS1 upsd upsmon. Grepping a ps command shows that both /sbin/upsd and /sbin/upsmon are running. nut sends the following to syslog upsd[...]: Warinig: Data for UPS [myups] is stale - check driver upsd[...]: Startup successful upsd[...]: Connection from 127.0.0.1 upsmon[...]: Startup successful upsmon[...]: Poll UPS [EMAIL PROTECTED] failed - Data stale upsmon[...]: UPS [EMAIL PROTECTED] is unavailable upsmon[...]: Poll UPS [EMAIL PROTECTED] failed - Data stale ... Here are the things I know (have tried). 1- The UPS and supplied cable are good, (works with supplied software from Windows). 2- /dev/ttyS1 is the correct port. I moved the mouse from ttyS0 to S1 and configured gpm to make sure. (of course I moved it back when done with test:) 3- /dev/ttyS1 is 660 root.nut 4- /lib/nut/cyberpower is 750 nut.nut 5- nut version is 0.45.5 and Cyberpower driver is experimental. Reading list archives at http://lists.exploits.org/upsdev/ shows lots of activity on this UPS. upsd.conf UPS myups /lib/nut/cyberpower-ttyS1 cyberpower /dev/ttyS1 upsmon.conf MONITOR [EMAIL PROTECTED] 1 nut_pass master I thought I would start with Debian User before I bother the nut list. It looks like the the Cyberpower driver should be working (to some extent) from all the messages on the list. Thanks for any help. -- Bill C.R.E.A.M. Dark Angel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
