On Wed, Apr 24, 2002 at 03:50:19PM -0400, David Roundy wrote: > > > I've got a Linksys PCW11 card that works fine under RH7.2 using > > the wlan-ng package (prism2_cs.o). > > > > Unfortunately, the card isn't recognized correctly on a machine > > running a recent install of Woody. Cardmgr loads wvlan_cs.o, > > which doesn't recognize the card. (There appears to be no > > prism2 driver.) > > prism2 cards are supported by the orinoco_cs driver. You just > need a line something like this: > > card "PROXIM RangeLAN-DS/LAN PC Card" > manfid 0x0126, 0x8000 > bind "orinoco_cs" > > in your /etc/pcmcia/config or /etc/pcmcia/config-2.4 file. Mine's in > config-2.4, since I'm using the drivers that are in the 2.4 kernel.
I did get it to work with the orinoco_cs driver that comes with the pcmcia-modules for the 2.4 kernel. It doesn't work with the 2.2.20 modules. One quirk was that I had to define a start_fn() in network.opts that did a iwpriv card_reset. Otherwise the card would only find the AP the first time it was inserted. -- Grant Edwards [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
