As soon as I mailed this I figured it out. I needed to compile in the Matrox driver into my 2.4.18 kernel. I had the AGP support but no Matrox support.
Thanks, Mike On Sun, Apr 07, 2002 at 09:29:10AM -0500, Michael J. Madden wrote: > Has anyone gotten hardware acceleration for the Matrox G400 working > under Woody. I am using XFree86 4.1.0-14 with kernel 2.4.18. > > I keep getting the following message in XFree86.0.log and glxinfo > reports direct rendering is disabled. > (==) MGA(0): Direct rendering disabled > > Here is my XFree86Config-4 file: > > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by dexconf, only make > changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/ttyS0" > Option "Protocol" "Microsoft" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "MGA" > VendorName "Matrox" > Driver "mga" > Option "AGPMode" "1" > VideoRam 32768 > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 30-94 > VertRefresh 50-75 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "MGA" > Monitor "Generic Monitor" > DefaultDepth 16 > SubSection "Display" > Depth 1 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1280x1024" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1280x1024" > ViewPort 0 0 > EndSubSection > SubSection "Display" > Depth 24 > Modes "1280x1024" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > ### END DEBCONF SECTION > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
