Hi, On Tue, 19 Feb 2002, Sebastiaan wrote: > Ah, good to hear. I am not the only one. Well, currently this seems to > work: > > cdrecord dev=1,0,0 speed=2 -v fs=8m -dao bla.iso > < then the drive complains about this: > > Then I do just the same without the -dao parameter (and ejects): > cdrecord dev=1,0,0 speed=2 -v fs=8m -eject bla.iso > > > My past 4 burns went without problems. I hope that the -dao parameter > actually does something to the drive (and it is not reset, because the > tray stays closed). I take the errors for granted and just start the > normal process. > > Perhaps I have been lucky until now. The time will learn. > Nope, dream's over. It failed this time again with: Writing time: 1797.409s Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 00 00 00 19 00 06 2F 41 2C 04 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0 Sense flags: Blk 0 (valid) cmd finished after 0.010s timeout 480s Fixating time: 0.020s cdrecord: fifo had 16761 puts and 16761 gets. cdrecord: fifo was 0 times empty and 16491 times full, min fill was 98%.
Greetz, Sebastiaan
