On Mon, 11 Feb 2002 12:07:40 -0800 "Jeremy T. Bouse" <[EMAIL PROTECTED]> wrote: > From my own configuration I had Xinerama working fine with 2 > seperate cards... My problem was they were not identical so I had to > run the display at the lower cards maximum settings for both cards... > This works fine if the lowest common settings are still fairly > decent...
I've used Xinerama before myself, with two seperate cards. I didn't have to run them at the same resolution. One was 800x600, the other was 1152x864. Worked just fine :) I have heard a lot of people say the same thing as you, though (that you have to run both heads at the same resolution). Can you point to a doc where you read this? Or describe the problems that arise when you run the heads at different resolutions? -- .--=====-=-=====-=========----------=====-----------=-=-----=. / David Barclay Harris Aut agere, aut mori. \ \ Clan Barclay Either action, or death. / `-------======-------------=-=-----=-===-=====-------=--=----'
pgpLcAF6OGtyI.pgp
Description: PGP signature
