Hi everybody, I'm using a Plexwriter 24/10/40, but I have problems when I write at 10x. (havn't tried 24 yet [:)] ) My default input buffer is of 24m however I have tried using 64, 128 etc.. whatever I do, the buffer eventually reaches 0% (the bigger the buffer the slower it takes to get to 0) then bounces back to 100% gradually then goes down again. It's reading from a cdrom device at approx 50x, but the same problem occurs from a fast disk. I'm passing driveropts=burnproof to cdrecord not knowing exactly what it does however does seem to record stuff correctly even if the buffer overflows. Here are the last lines of output from cdrecord:
Track 01: Total bytes read/written: 516194304/516194304 (252048 sectors). Writing time: 376.461s Fixating... Fixating time: 34.818s cdrecord: fifo had 8132 puts and 8132 gets. cdrecord: fifo was 250 times empty and 0 times full, min fill was 0%. Any ideas and/or suggestions are greatly appreciated. David.
