Hi I am trying to use my HP PSC 750 connected via USB.
My kernel is "Linux Fenix 2.2.18pre21" The dmesg command gives ... usb.c: registered new driver usblp usb.c: registered new driver usbscanner scanner.c: USB Scanner support registered. usbserial.c: USB Serial support registered for Generic usb.c: registered new driver serial uhci.c: USB UHCI at I/O 0xe000, IRQ 10 uhci.c: detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 usb.c: USB device 1 (prod/vend 0x0/0x0) is not claimed by any active driver. usb.c: registered new driver usbdevfs usb.c: registered new driver hub hub.c: USB hub found hub.c: 2 ports detected VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 48k freed usb.c: USB new device connect, assigned device number 2 usb.c: USB device 2 (prod/vend 0x45e/0x1b) is not claimed by any active driver. Swap area shorter than signature indicates Swap area shorter than signature indicates usb.c: USB new device connect, assigned device number 3 printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 registered device ppp0 I already tried to do (as said in http://www.linux-usb.org/USB-guide/x342.html) mknod /dev/usb/lp0 c 180 0 but it seems that I cannot comunicate with the printer: Can you help me? Thank you. -- Pedro Quaresma de Almeida e-mail: [EMAIL PROTECTED]
