On Thu, 13 Mar 2003 14:23:08 -0500
"Wathen, Metherion" <[EMAIL PROTECTED]> wrote:
> solution. I just installed Woody (stable) on an older PC with a 3Dfx
> Voodoo3 video card (16Mb RAM on the vid card) after some trial and
> error I finally got X-4.1 to work but now it shifts the video screen
> to right far enough that the monitor/screen adjustment buttons aren't
> effective, yet everything (so far) displays in the visible area.
Play a bit with xvidtune and if your satisfied with one setting, then
add those to your /etc/x11/XF86Config-4. You could add one or more new
video modes to your monitor section like this:
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-69
VertRefresh 50-120
Option "DPMS"
# 1024x768 @ 82 Hz, 65.18 kHz hsync
Mode "1024x768c"
DotClock 85
HTimings 1024 1056 1176 1304
VTimings 768 772 775 795
EndMode
...
EndSection
Of course you can call the video mode(s) whatever you want, but I always
use to name it to the resolution plus "c" for "custom". Then you can use
this video mode in your display modes in the screen section:
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
...
SubSection "Display"
Depth 16
Modes "1024x768c" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768c" "800x600" "640x480"
EndSubSection
EndSection
Don't forget to set your default depth and that's it!
Regards,
Christian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
