Hello everyone,
I am having some trouble setting up my cam in Debain Stable.
It is based on the omnivision chipset and is producing a screen full of
jumbled garbage. I get the impression that the problem may be from the video
4 Linux module, by looking at dmesg and from stderr from Xawtv. I have
included text files for dmesg and the stderr for Xawtv. I realize that the
documentation for the ov511.o module (required for my cam) says to compile
Xawtv with a different Videosync and screen size, which I did, and got a
screen full of garbage. So I deleted the compiled binary and installed the
Debain package (which the included stderr is from), but this gives the same
v4l errors tho:). I also get the same screen of garbage from w3cam, which is
a cgi-bin for a webcam, (which the output of dmesg is from). Does anyone
have any idea what I could be doing wrong? I can't find anything on tuning
v4l anywhere!
TIA , Martin :-)
<<DMESG2.TXT>> <<XAWTVERR.TXT>>
Linux version 2.2.18pre21 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat Nov
18 18:47:15 EST 2000
Detected 598186 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1192.75 BogoMIPS
Memory: 63216k/66496k available (1728k kernel code, 408k reserved, 996k data,
148k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
128K L2 cache (4 way)
CPU: L2 Cache: 128K
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfb200
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
SIS5513: IDE controller on PCI bus 00 dev 01
SIS5513: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLlct15 15, ATA DISK drive
hdb: SAMSUNG SV3002H, ATA DISK drive
hdc: CD-W54E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: QUANTUM FIREBALLlct15 15, 14324MB w/418kB Cache, CHS=1826/255/63
hdb: SAMSUNG SV3002H, 28667MB w/468kB Cache, CHS=3654/255/63
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 >
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 148k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 257000k swap-space (priority -1)
NTFS version 000607
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
Linux video capture interface: v1.00
V4L-Driver for Vision CPiA based cameras v1.0.0
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport_probe: failed
parport0: no IEEE-1284 device present.
Parallel port driver for Vision CPiA based cameras v1.0.0
0 camera(s) found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver cpia
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
parport_probe: failed
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
Serial driver version 4.27 with no serial options enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Trident 4DWave/SiS 7018/Ali 5451 PCI Audio, version 0.14.6a, 19:15:32 Nov 18
2000
trident: SiS 7018 PCI Audio found at IO 0xe000, IRQ 5
ac97_codec: AC97 Audio codec, vendor id1: 0x4352, id2: 0x5934 (Cirrus Logic
CS4299)
i2c: initialized
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
PPP Deflate Compression module registered
sis900.c: v1.06.05 08/24/00
eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 11, 00:10:c6:03:6f:63.
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using SiS 900 Internal MII PHY as default
PPP BSD Compression module registered
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
usb.c: registered new driver audio
usb.c: registered new driver ibmcam
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usblp
usb.c: registered new driver usbscanner
scanner.c: USB Scanner support registered.
usb-ohci.c: USB OHCI at membase 0xc4909000, IRQ 4
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xc490b000, IRQ 4
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usb_mouse
usbserial.c: USB Serial support registered for Generic
usb.c: registered new driver serial
usb.c: USB new device connect, assigned device number 2
mouse0: PS/2 mouse device for input0
input0: Microsoft Microsoft IntelliMouse® Optical on usb1:2.0
usb.c: USB new device connect, assigned device number 3
usb.c: USB device 3 (prod/vend 0x5a9/0x511) is not claimed by any active driver.
usb.c: USB new device connect, assigned device number 2
usb.c: USB device 2 (prod/vend 0x4a9/0x2206) is not claimed by any active
driver.
eth0: Media Link Off
Linux PCMCIA Card Services 3.1.22
kernel build: 2.2.18pre21 unknown
options: [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfde70
Intel PCIC probe: not found.
ds: no socket drivers loaded!
eth0: no IPv6 routers present
usb.c: registered new driver ov511
ov511.c: [ov511_probe:3156] probing for device...
ov511.c: [ov511_probe:3156] probing for device...
ov511.c: USB OV511 camera found
ov511.c: camera: Puretek PT-6007
ov511.c: [ov511_set_packet_size:768] set packet size: 0, mult=0, alt=7
ov511.c: [ov511_reset:706] Reset: type=0x3F
ov511.c: [ov511_reset:706] Reset: type=0x3F
ov511.c: [ov511_reset:706] Reset: type=0x3F
ov511.c: [ov76xx_configure:2810] I2C synced in 1 attempt(s) (method 1)
ov511.c: Sensor is an OV7610
ov511.c: [ov511_mode_init_regs:918] width:640, height:480, mode:4, sub:0
ov511.c: ov511 driver version 1.25 registered
ov511.c: [ov511_init_isoc:1819] *** Initializing capture ***
ov511.c: [ov511_set_packet_size:768] set packet size: 993, mult=31, alt=1
ov511.c: [ov511_reset:706] Reset: type=0x3F
ov511.c: [ov511_mode_init_regs:918] width:320, height:240, mode:4, sub:0
ov511.c: [ov511_stop_isoc:1895] *** Stopping capture ***
ov511.c: [ov511_set_packet_size:768] set packet size: 0, mult=0, alt=7
ov511.c: [ov511_reset:706] Reset: type=0x3F
ov511.c: [ov511_init_isoc:1819] *** Initializing capture ***
ov511.c: [ov511_set_packet_size:768] set packet size: 993, mult=31, alt=1
ov511.c: [ov511_reset:706] Reset: type=0x3F
ov511.c: [ov511_stop_isoc:1895] *** Stopping capture ***
ov511.c: [ov511_set_packet_size:768] set packet size: 0, mult=0, alt=7
ov511.c: [ov511_reset:706] Reset: type=0x3F
This is xawtv-3.06, running on Linux/i686 (2.2.18pre21)
visual: id=0x22 class=4 (TrueColor), depth=16
x11: 1024x768, 16 bit/pixel, 2048 byte/scanline, DGA, VidMode
/dev/video: no overlay support
waitpid: No child processes
v4l-conf had some trouble, trying to continue anyway
/dev/video: no overlay support
waitpid: No child processes
v4l-conf had some trouble, trying to continue anyway
v4l: 0x0, 0 bit/pixel, 0 byte/scanline
WARNING: v4l and dga disagree about the screen size
WARNING: Is v4l-conf installed correctly?
WARNING: v4l and dga disagree about the color depth
WARNING: Is v4l-conf installed correctly?
16 0
WARNING: v4l and dga disagree about the framebuffer base
WARNING: Is v4l-conf installed correctly?
ov_fbuf.base=(nil), base=0xd8000000
WARNING: overlay mode disabled
wmhooks: gnome
Warning: Cannot convert string "-*-ledfixed-medium-r-semicondensed--39-*" to
type FontStruct
v4l: oops: got sigalarm
ioctl VIDIOCSYNC: Interrupted system call
grab: no match for: 384x288 16 bit TrueColor (LE)
