I have a Soundblaster AWE64 which was detected automatically by Mandrake. Now I'm running Woody and I can't get the card detected. pnpdump finds a bunch of listings but pnpprobe gives me "no cards found".
I've been through the mini-HOWTO, edited my isapnp.conf and even get some confirmation messages at boot but I still can't get the card recognized by sndconfig. Here's my /etc/isapnp.conf file (pretty much cribbed from the HOWTO at this point: # $Id: pnpdump.c,v 1.9 1997/06/10 21:37:32 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER (READPORT 0x0203) (ISOLATE) (IDENTIFY *) # Try the following if you get error messages like # Error occurred executing request 'LD 2' on or around line... #(VERIFYLD N) # ANSI string -->Creative SB32 PnP<-- (CONFIGURE CTL0048/58128 (LD 0 # ANSI string -->Audio<-- (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (BASE 0x0220)) (IO 1 (BASE 0x0330)) (IO 2 (BASE 0x0388)) (ACT Y) )) (CONFIGURE CTL0048/58128 (LD 1 # ANSI string -->IDE<-- # (INT 0 (IRQ 10 (MODE +E))) # (IO 0 (BASE 0x0168)) # (IO 1 (BASE 0x036e)) # (ACT Y) )) (CONFIGURE CTL0048/58128 (LD 2 # ANSI string -->WaveTable<-- (IO 0 (BASE 0x0620)) (IO 1 (BASE 0x0A20)) (IO 2 (BASE 0x0E20)) (ACT Y) )) (CONFIGURE CTL0048/58128 (LD 3 # ANSI string -->Game<-- (IO 0 (BASE 0x0200)) (ACT Y) )) # Returns all cards to the "Wait for Key" state (WAITFORKEY) What's the trick to this? - Chris
