On Sunday, October 14, 2001 7:23 AM, [EMAIL PROTECTED] wrote:
> I've installed and compiled the pcmcia source coming with Bunk's stuff
> under potato and kernel 2.4.9 (of course enabling pcmcia in the
> kernel). Then I've installed pcmcia-cs.
>
> Now when I start pcmcia service with two cards inserted (a modem and an
ethernet card) the answer is as follows:
>
> debian:/home/dada# /etc/init.d/pcmcia start
> Starting PCMCIA services: modules/lib/modules/2.4.9/pcmcia/i82365.o:
init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
> /lib/modules/2.4.9/pcmcia/ds.o: init_module: Operation not permitted
> Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
> cardmgr.
I had the same problem upon upgrading to
2.4.9. The modules are organized differently.
To get the net xfc up, I have to load modules in this
order on my Dell Inspiron 5000 (obviously, your
ether card may be different) :
pcmcia_core
yenta_socket
ds
cb_enabler
3c59x <---- I used to load 3c575_cb but
now one module does it all.
For some reason I still don't udnerstand, the
i82365 module won't load at all on my
machine. The above setup works, however.
Best,
-=greg
