On Sat, Oct 13, 2001 at 04:42:18PM -0400, Rong Fan wrote:
| Hello,
| my ethernet card(D-Link DFE-530TX+) wasn't recognized during installation.
what should i
| do to make it work? any advice is welcome.
Run 'modconf' and pick the tulip driver. Then see 'man interfaces'
for information on editing /etc/network/interfaces to set up the
logical part of the network connection. For example :
Static IP, load at boot time :
auto eth0
iface eth0 inet static
address 192.168.0.6
netmask 255.255.255.0
gateway 192.168.0.1
Dynamic IP, load at boot time :
auto eth0
iface eth0 inet dhcp
HTH,
-D
