----- Original Message ----- From: "Bojan Zdrnja" <[EMAIL PROTECTED]> To: <debian-user@lists.debian.org> Sent: Thursday, October 11, 2001 10:00 AM Subject: RE: ethernet card IO address
> This looks to me like you're choosing wrong module. > Which card was it ? My card is a standard 100/10M ethernet PCI one. To be exact it's a SURECOM EP-320X-R. > Regards, Bojan > > > -----Original Message----- > > From: MarceI Figuerola Estrada [mailto:[EMAIL PROTECTED] > > Sent: 10. listopad 2001 22:17 > > To: debian-user@lists.debian.org > > Subject: ethernet card IO address > > > > > > I've tried to load the module that friend Vineet suggested > > for my ethernet card. I did it giving no parameters (io, > > irq). I got the following error: > > > > >/lib/modules /2.2.18pre21/net/via-rhine.o: init module: > > Device or resource busy. > > > Hint: this error can be caused by incorrect module > > parameters including invalid IO or IRQ parameters > > > > >/lib/modules /2.2.18pre21/net/via-rhine.o: insmod > > /lib/modules /2.2.18pre21/net/via-rhine.o failed > > > > >/lib/modules /2.2.18pre21/net/via-rhine.o: insmod via-rhine failed > > > > >Installation failed > > > > So what is the problem? If I'm supposed to introduce the IO > > and IRQ parameters where can I get them from? Can I see it in Windows? > > > > Looking at the properties of the card in windows I see the following: > > > > Interrupt request: 11 > > Memory range: DE000000 - DE0000FF > > I/O Interval: E000 - E0FF > > > > So I guess IRQ=11 but IO equals to what? > > > > Thank you, > > > > Marcel > > > > > > ----- Original Message ----- > > From: "Vineet Kumar" <[EMAIL PROTECTED]> > > To: <debian-user@lists.debian.org> > > Sent: Wednesday, October 10, 2001 8:48 PM > > Subject: Re: ethernet card > > > > See this page: > > > > http://lhd.datapower.com/db/dispreport.cgi?DISP?1633 > > > > unfortunately, the description is slightly incomplete. > > > > You should use the via-rhine module. I don't have a stock > > kernel package > > lying around to check for sure, but I believe this module is included > > with the stock debian kernel-images, meaning you shouldn't have to > > recompile anything. > > > > good times, > > > > -- > > Vineet http://www.anti-dmca.org > > Unauthorized use of this .sig may constitute violation of US law. > > echo Qba\'g gernq ba zr\! |tr 'a-zA-Z' 'n-za-mN-ZA-M' > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
