Eskild Wikkeling wrote:
Hello,I recently got a ADSL modem for babyxl (a dutch adsl provider that uses dhcp to give me my ip) and am trying to get it to work. in /etc/network/interfaces I have: auto eth0 eth1 iface eth0 inet static <SNIP> iface eth1 inet dhcp hostname MYNAME.demon.nl and in /etc/pump.conf: domainsearch "demon.nl" retries 3 timeout 60 device eth1 { } when I run ifup eth1 I get the following error in /var/log/syslog: Oct 4 12:52:41 cumulus pumpd[5098]: HOSTNAME: requesting MYNAME.demon.nl Oct 4 12:52:41 cumulus pumpd[5098]: PUMP: sending discover Oct 4 12:52:41 cumulus pumpd[5098]: breq: opcode: 1 Oct 4 12:52:41 cumulus pumpd[5098]: breq: hw: 1 Oct 4 12:52:41 cumulus pumpd[5098]: breq: hwlength: 6 Oct 4 12:52:41 cumulus pumpd[5098]: breq: hopcount: 0 Oct 4 12:52:41 cumulus pumpd[5098]: breq: xid: 0x45359f55 Oct 4 12:52:41 cumulus pumpd[5098]: breq: secs: 0 Oct 4 12:52:41 cumulus pumpd[5098]: breq: flags: 0x0000 Oct 4 12:52:41 cumulus pumpd[5098]: breq: ciaddr: 0.0.0.0 Oct 4 12:52:41 cumulus pumpd[5098]: breq: yiaddr: 0.0.0.0 Oct 4 12:52:41 cumulus pumpd[5098]: breq: server_ip: 0.0.0.0 Oct 4 12:52:41 cumulus pumpd[5098]: breq: bootp_gw_ip: 0.0.0.0 Oct 4 12:52:41 cumulus pumpd[5098]: breq: hwaddr: Oct 4 12:52:41 cumulus pumpd[5098]: breq: servername: Oct 4 12:52:41 cumulus pumpd[5098]: breq: bootfile: Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: 0x63 0x53 0x82 0x63 Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: 53 1 0x01 Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: 12 17 0x73 0x74 0x72 0x6 Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: ++++++ 0x74 0x75 0x73 0x2e Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: ++++++ 0x64 0x65 0x6d 0x6f Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: ++++++ 0x6e 0x2e 0x6e 0x6c Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: ++++++ 0x00 Oct 4 12:52:41 cumulus pumpd[5098]: breq: vendor: 0xff Oct 4 12:52:41 cumulus kernel: Packet log: output DENY eth1 PROTO=17 192.168.0. 1:68 255.255.255.255:67 L=328 S=0x00 I=54009 F=0x0000 T=64 (#6) can someone tell me where things are going wrong? thanks heaps, Eskild
Dumb pump. Pump has some problems with two networkinterfaces. No, I don't use it. but after following few Usenet discussion in Finnish usenet groups, problems seem to disappear when installing dhcp. It works with some people, but all problems I've heard so far concerning dhcp+ISP have been by people who use pump. Antti
