* Pete Willemsen ([EMAIL PROTECTED]) wrote: > Hi. > > I've been attempting to get an Epson Stylus Color 880 printer to work > with my Debian unstable system. I'm running the latest version of CUPS > from the unstable archive and have been unsuccessful at getting > documents to print in portrait mode. In other words, every document I > print whether it is text, ps, or pdf comes out in landscape mode. I > have not modified any of the CUPS config files other than to setup my > printer through the web interface. > > For comparison I took an Epson Stylus Color 777 and set it up on a > similar system and it worked correctly printing portrait documents in > portrait mode. > > Has anyone experience anything like this? I'm stumped as to what > configuration files I need to mess with to get the CUPS rasterizer to > print the documents in the correct orientation. Any suggestions? > > Many thanks. > Pete
Hi Pete, I don't know if it'll help, but here are my "ppd" and "cupsd.conf" files attached. THese surely work on my unstable system with an ESC 800 printer, just like yours. Alex. ----------------------- Oleksandr Moskalenko [EMAIL PROTECTED] ----------------------- My PGP public key can be found at http://www.tagancha.org/pgp ---------------- Public key ID and fingerprint ----------------- pub 1024D/6C5F196B 2001-08-17 Oleksandr V. Moskalenko (Alex) <[EMAIL PROTECTED]> Fingerprint = EE63 C471 ADBA 5D80 ADFB 1054 DA28 6F32 6C5F 196B ----------------------------------------------------------------
*PPD-Adobe: "4.3" *% *% "$Id: stcolor.ppd,v 1.6 2001/02/22 16:48:12 mike Exp $" *% *% Sample EPSON Stylus Color driver PPD file for the Common UNIX Printing *% System (CUPS). *% *% Copyright 1997-2001 by Easy Software Products. *% *% These coded instructions, statements, and computer programs are the *% property of Easy Software Products and are protected by Federal *% copyright law. Distribution and use rights are outlined in the file *% "LICENSE.txt" which should have been included with this file. If this *% file is missing or damaged please contact Easy Software Products *% at: *% *% Attn: CUPS Licensing Information *% Easy Software Products *% 44141 Airport View Drive, Suite 204 *% Hollywood, Maryland 20636-3111 USA *% *% Voice: (301) 373-9603 *% EMail: [EMAIL PROTECTED] *% WWW: http://www.cups.org *% *FormatVersion: "4.3" *FileVersion: "1.1" *LanguageVersion: English *LanguageEncoding: ISOLatin1 *PCFileName: "STCOLOR.PPD" *Manufacturer: "ESP" *Product: "(CUPS v1.1)" *cupsVersion: 1.1 *cupsManualCopies: True *cupsModelNumber: 2 *cupsFilter: "application/vnd.cups-raster 0 rastertoepson" *cupsColorProfile 180dpi/-: "1.0 1.0 1.0 0.0 -0.2 -0.4 1.0 0.0 -0.2 0.0 1.0" *cupsColorProfile 360dpi/-: "1.0 1.5 1.0 0.0 -0.2 -0.4 1.0 0.0 -0.2 0.0 1.0" *cupsColorProfile 720dpi/-: "1.0 2.5 1.0 0.0 -0.2 -0.4 1.0 0.0 -0.2 0.0 1.0" *ModelName: "EPSON Stylus Color Series" *ShortNickName: "EPSON Stylus Color Series" *NickName: "EPSON Stylus Color Series CUPS v1.1" *PSVersion: "(3010.000) 550" *LanguageLevel: "3" *ColorDevice: True *DefaultColorSpace: RGB *FileSystem: False *Throughput: "1" *LandscapeOrientation: Plus90 *VariablePaperSize: False *TTRasterizer: Type42 *OpenUI *PageSize/Media Size: PickOne *OrderDependency: 10 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice" *PageSize Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice" *PageSize A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice" *CloseUI: *PageSize *OpenUI *PageRegion: PickOne *OrderDependency: 10 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice" *PageRegion Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice" *PageRegion A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice" *CloseUI: *PageRegion *DefaultImageableArea: Letter *ImageableArea Letter: "8.60 39.60 603.40 766.49" *ImageableArea Legal: "8.60 39.60 603.40 982.49" *ImageableArea A4: "8.60 39.60 586.40 816.49" *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension A4: "595 842" *OpenUI *Resolution/Output Resolution: PickOne *OrderDependency: 20 AnySetup *Resolution *DefaultResolution: 360dpi *Resolution 180dpi/180 DPI: "<</HWResolution[180 180]>>setpagedevice" *Resolution 360dpi/360 DPI: "<</HWResolution[360 360]>>setpagedevice{0.6666 exp}bind settransfer" *Resolution 720dpi/720 DPI: "<</HWResolution[720 720]>>setpagedevice{0.4 exp}bind settransfer" *CloseUI: *Resolution *OpenUI *ColorModel/Output Mode: PickOne *OrderDependency: 10 AnySetup *ColorModel *DefaultColorModel: Gray *ColorModel CMYK/Color: "<</cupsColorOrder 1/cupsColorSpace 8/cupsCompression 1>>setpagedevice" *ColorModel Gray/Grayscale: "<</cupsColorOrder 0/cupsColorSpace 3/cupsCompression 1>>setpagedevice" *CloseUI: *ColorModel *DefaultFont: Courier *Font AvantGarde-Book: Standard "(001.006S)" Standard ROM *Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM *Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM *Font Bookman-Demi: Standard "(001.004S)" Standard ROM *Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM *Font Bookman-Light: Standard "(001.004S)" Standard ROM *Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM *Font Courier: Standard "(002.004S)" Standard ROM *Font Courier-Bold: Standard "(002.004S)" Standard ROM *Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM *Font Courier-Oblique: Standard "(002.004S)" Standard ROM *Font Helvetica: Standard "(001.006S)" Standard ROM *Font Helvetica-Bold: Standard "(001.007S)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM *Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM *Font Palatino-Bold: Standard "(001.005S)" Standard ROM *Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM *Font Palatino-Italic: Standard "(001.005S)" Standard ROM *Font Palatino-Roman: Standard "(001.005S)" Standard ROM *Font Symbol: Special "(001.007S)" Special ROM *Font Times-Bold: Standard "(001.007S)" Standard ROM *Font Times-BoldItalic: Standard "(001.009S)" Standard ROM *Font Times-Italic: Standard "(001.007S)" Standard ROM *Font Times-Roman: Standard "(001.007S)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM *Font ZapfDingbats: Special "(001.004S)" Standard ROM *% *% End of "$Id: stcolor.ppd,v 1.6 2001/02/22 16:48:12 mike Exp $". *%
# # "$Id: cupsd.conf,v 1.35 2001/07/25 21:03:32 mike Exp $" # # Sample configuration file for the Common UNIX Printing System (CUPS) # scheduler. # # Copyright 1997-2001 by Easy Software Products, all rights reserved. # # These coded instructions, statements, and computer programs are the # property of Easy Software Products and are protected by Federal # copyright law. Distribution and use rights are outlined in the file # "LICENSE.txt" which should have been included with this file. If this # file is missing or damaged please contact Easy Software Products # at: # # Attn: CUPS Licensing Information # Easy Software Products # 44141 Airport View Drive, Suite 204 # Hollywood, Maryland 20636-3111 USA # # Voice: (301) 373-9603 # EMail: [EMAIL PROTECTED] # WWW: http://www.cups.org # ######################################################################## # # # This is the CUPS configuration file. If you are familiar with # # Apache or any of the other popular web servers, we've followed the # # same format. Any configuration variable used here has the same # # semantics as the corresponding variable in Apache. If we need # # different functionality then a different name is used to avoid # # confusion... # # # ######################################################################## ######## ######## Server Identity ######## # # ServerName: the hostname of your server, as advertised to the world. # By default CUPS will use the hostname of the system. # # To set the default server used by clients, see the client.conf file. # #ServerName myhost.domain.com # # ServerAdmin: the email address to send all complaints/problems to. # By default CUPS will use "[EMAIL PROTECTED]". # #ServerAdmin [EMAIL PROTECTED] ######## ######## Server Options ######## # # AccessLog: the access log file; if this does not start with a leading / # then it is assumed to be relative to ServerRoot. By default set to # "/var/log/cups/access_log" # # You can also use the special name "syslog" to send the output to the # syslog file or daemon. # AccessLog /var/log/cups/access_log # # Classification: the classification level of the server. If set, this # classification is displayed on all pages, and raw printing is disabled. # The default is the empty string. # #Classification classified #Classification confidential #Classification secret #Classification topsecret #Classification unclassified # # ClassifyOverride: whether to allow users to override the classification # on printouts. If enabled, users can limit banner pages to before or # after the job, and can change the classification of a job, but cannot # completely eliminate the classification or banners. # # The default is off. # #ClassifyOverride off # # DataDir: the root directory for the CUPS data files. # By default /usr/share/cups. # #DataDir /usr/share/cups # # DefaultCharset: the default character set to use. If not specified, # defaults to utf-8. Note that this can also be overridden in # HTML documents... # #DefaultCharset utf-8 # # DefaultLanguage: the default language if not specified by the browser. # If not specified, the current locale is used. # #DefaultLanguage en # # DocumentRoot: the root directory for HTTP documents that are served. # By default the compiled in directory. # DocumentRoot /usr/share/doc/cupsys # # ErrorLog: the error log file; if this does not start with a leading / # then it is assumed to be relative to ServerRoot. By default set to # "/var/log/cups/error_log" # # You can also use the special name "syslog" to send the output to the # syslog file or daemon. # ErrorLog /var/log/cups/error_log # # FontPath: the path to locate all font files (currently only for pstoraster) # By default /usr/share/cups/fonts. # #FontPath /usr/share/cups/fonts # # LogLevel: controls the number of messages logged to the ErrorLog # file and can be one of the following: # # debug2 Log everything. # debug Log almost everything. # info Log all requests and state changes. # warn Log errors and warnings. # error Log only errors. # none Log nothing. # LogLevel info # # MaxLogSize: controls the maximum size of each log file before they are # rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating. # #MaxLogSize 0 # # PageLog: the page log file; if this does not start with a leading / # then it is assumed to be relative to ServerRoot. By default set to # "/var/log/cups/page_log" # # You can also use the special name "syslog" to send the output to the # syslog file or daemon. # PageLog /var/log/cups/page_log # # PreserveJobHistory: whether or not to preserve the job history after a # job is completed, cancelled, or stopped. Default is Yes. # #PreserveJobHistory Yes # # PreserveJobFiles: whether or not to preserve the job files after a # job is completed, cancelled, or stopped. Default is No. # #PreserveJobFiles No # # AutoPurgeJobs: automatically purge jobs when not needed for quotas. # Default is No. # #AutoPurgeJobs No # # MaxJobs: maximum number of jobs to keep in memory (active and completed.) # Default is 0 (no limit.) # #MaxJobs 0 # # Printcap: the name of the printcap file. Default is /etc/printcap. # Leave blank to disable printcap file generation. # Printcap /etc/printcap.cups # # RequestRoot: the directory where request files are stored. # By default /var/spool/cups. # #RequestRoot /var/spool/cups # # RemoteRoot: the name of the user assigned to unauthenticated accesses # from remote systems. By default "remroot". # #RemoteRoot remroot # # ServerBin: the root directory for the scheduler executables. # By default /usr/lib/cups or /usr/lib32/cups (IRIX 6.5). # #ServerBin /usr/lib/cups # # ServerRoot: the root directory for the scheduler. # By default /etc/cups. # #ServerRoot /etc/cups ######## ######## Encryption Support ######## # # ServerCertificate: the file to read containing the server's certificate. # Defaults to "/etc/cups/ssl/server.crt". # #ServerCertificate /etc/cups/ssl/server.crt # # ServerKey: the file to read containing the server's key. # Defaults to "/etc/cups/ssl/server.key". # #ServerKey /etc/cups/ssl/server.key ######## ######## Filter Options ######## # # User/Group: the user and group the server runs under. Normally this # must be lp and sys, however you can configure things for another user # or group as needed. # # Note: the server must be run initially as root to support the # default IPP port of 631. It changes users whenever an external # program is run... # User lp Group sys # # RIPCache: the amount of memory that each RIP should use to cache # bitmaps. The value can be any real number followed by "k" for # kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles # (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes). # #RIPCache 8m # # TempDir: the directory to put temporary files in. This directory must be # writable by the user defined above! Defaults to "/var/spool/cups/tmp" or # the value of the TMPDIR environment variable. # #TempDir /var/spool/cups/tmp # # FilterLimit: sets the maximum cost of all job filters that can be run # at the same time. A limit of 0 means no limit. A typical job may need # a filter limit of at least 200; limits less than the minimum required # by a job force a single job to be printed at any time. # # The default limit is 0 (unlimited). # #FilterLimit 0 ######## ######## Network Options ######## # # Ports/addresses that we listen to. The default port 631 is reserved # for the Internet Printing Protocol (IPP) and is what we use here. # # You can have multiple Port/Listen lines to listen to more than one # port or address, or to restrict access: # # Port 80 # Port 631 # Listen hostname # Listen hostname:80 # Listen hostname:631 # Listen 1.2.3.4 # Listen 1.2.3.4:631 # # NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades # for encryption. If you want to support web-based encryption you'll # probably need to listen on port 443 (the "https" port...) # #Port 80 #Port 443 Port 631 # # HostNameLookups: whether or not to do lookups on IP addresses to get a # fully-qualified hostname. This defaults to Off for performance reasons... # #HostNameLookups On # # KeepAlive: whether or not to support the Keep-Alive connection # option. Default is on. # #KeepAlive On # # KeepAliveTimeout: the timeout before Keep-Alive connections are # automatically closed. Default is 60 seconds. # #KeepAliveTimeout 60 # # MaxClients: controls the maximum number of simultaneous clients that # will be handled. Defaults to 100. # #MaxClients 100 # # MaxRequestSize: controls the maximum size of HTTP requests and print files. # Set to 0 to disable this feature (defaults to 0.) # #MaxRequestSize 0 # # Timeout: the timeout before requests time out. Default is 300 seconds. # #Timeout 300 ######## ######## Browsing Options ######## # # Browsing: whether or not to broadcast and/or listen for CUPS printer # information on the network. Enabled by default. # Browsing Off # # BrowseProtocols: which protocols to use for browsing. Can be # any of the following separated by whitespace and/or commas: # # all - Use all supported protocols. # cups - Use the CUPS browse protocol. # slp - Use the SLPv2 protocol. # # The default is "cups". # # NOTE: If you choose to use SLPv2, it is *strongly* recommended that # you have at least one SLP Directory Agent (DA) on your # network. Otherwise, browse updates can take several seconds, # during which the scheduler will not response to client # requests. # #BrowseProtocols cups # # BrowseAddress: specifies a broadcast address to be used. By # default browsing information is not sent! # # Note: HP-UX does not properly handle broadcast unless you have a # Class A, B, C, or D netmask (i.e. no CIDR support). # # Note: Using the "global" broadcast address (255.255.255.255) will # activate a Linux demand-dial link with the default configuration. # If you have a LAN as well as the dial-up link, use the LAN's # broadcast address. # #BrowseAddress x.y.z.255 #BrowseAddress x.y.255.255 #BrowseAddress x.255.255.255 #BrowseAddress 255.255.255.255 # # BrowseShortNames: whether or not to use "short" names for remote printers # when possible (e.g. "printer" instead of "[EMAIL PROTECTED]".) Enabled by # default. # #BrowseShortNames Yes # # BrowseAllow: specifies an address mask to allow for incoming browser # packets. The default is to allow packets from all addresses. # # BrowseDeny: specifies an address mask to deny for incoming browser # packets. The default is to deny packets from no addresses. # # Both "BrowseAllow" and "BrowseDeny" accept the following notations for # addresses: # # All # None # *.domain.com # .domain.com # host.domain.com # nnn.* # nnn.nnn.* # nnn.nnn.nnn.* # nnn.nnn.nnn.nnn # nnn.nnn.nnn.nnn/mm # nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm # # The hostname/domainname restrictions only work if you have turned hostname # lookups on! # #BrowseAllow address #BrowseDeny address # # BrowseInterval: the time between browsing updates in seconds. Default # is 30 seconds. # # Note that browsing information is sent whenever a printer's state changes # as well, so this represents the maximum time between updates. # # Set this to 0 to disable outgoing broadcasts so your local printers are # not advertised but you can still see printers on other hosts. # #BrowseInterval 30 # # BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons. # #BrowseOrder allow,deny #BrowseOrder deny,allow # # BrowsePoll: poll the named server(s) for printers # #BrowsePoll address:port # # BrowsePort: the port used for UDP broadcasts. By default this is # the IPP port; if you change this you need to do it on all servers. # Only one BrowsePort is recognized. # #BrowsePort 631 # # BrowseRelay: relay browser packets from one address/network to another. # #BrowseRelay source-address destination-address # # BrowseTimeout: the timeout for network printers - if we don't # get an update within this time the printer will be removed # from the printer list. This number definitely should not be # less the BrowseInterval value for obvious reasons. Defaults # to 300 seconds. # #BrowseTimeout 300 # # ImplicitClasses: whether or not to use implicit classes. # # Printer classes can be specified explicitly in the classes.conf # file, implicitly based upon the printers available on the LAN, or # both. # # When ImplicitClasses is On, printers on the LAN with the same name # (e.g. Acme-LaserPrint-1000) will be put into a class with the same # name. This allows you to setup multiple redundant queues on a LAN # without a lot of administrative difficulties. If a user sends a # job to Acme-LaserPrint-1000, the job will go to the first available # queue. # # Enabled by default. # #ImplicitClasses On # # ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit # classes. # # When ImplicitAnyClasses is On and a local queue of the same name # exists, e.g. "printer", "[EMAIL PROTECTED]", "[EMAIL PROTECTED]", then # an implicit class called "Anyprinter" is created instead. # # When ImplicitAnyClasses is Off, implicit classes are not created # when there is a local queue of the same name. # # Disabled by default. # #ImplicitAnyCLasses Off # # HideImplicitMembers: whether or not to show the members of an # implicit class. # # When HideImplicitMembers is On, any remote printers that are # part of an implicit class are hidden from the user, who will # then only see a single queue even though many queues will be # supporting the implicit class. # # Enabled by default. # #HideImplicitMembers On ######## ######## Security Options ######## # # SystemGroup: the group name for "System" (printer administration) # access. The default varies depending on the operating system, but # will be "sys", "system", or "root" (checked for in that order.) # SystemGroup lpadmin # # Access permissions for each directory served by the scheduler. # Locations are relative to DocumentRoot... # # AuthType: the authorization to use: # # None - Perform no authentication # Basic - Perform authentication using the HTTP Basic method. # Digest - Perform authentication using the HTTP Digest method. # # (Note: local certificate authentication can be substituted by # the client for Basic or Digest when connecting to the # localhost interface) # # AuthClass: the authorization class; currently only "Anonymous", "User", # "System" (valid user belonging to group SystemGroup), and "Group" # (valid user belonging to the specified group) are supported. # # AuthGroupName: the group name for "Group" authorization. # # Order: the order of Allow/Deny processing. # # Allow: allows access from the specified hostname, domain, IP address, or # network. # # Deny: denies access from the specified hostname, domain, IP address, or # network. # # Both "Allow" and "Deny" accept the following notations for addresses: # # All # None # *.domain.com # .domain.com # host.domain.com # nnn.* # nnn.nnn.* # nnn.nnn.nnn.* # nnn.nnn.nnn.nnn # nnn.nnn.nnn.nnn/mm # nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm # # The host and domain address require that you enable hostname lookups # with "HostNameLookups On" above. # # Encryption: whether or not to use encryption; this depends on having # the OpenSSL library linked into the CUPS library and scheduler. # # Possible values: # # Always - Always use encryption (SSL) # Never - Never use encryption # Required - Use TLS encryption upgrade # IfRequested - Use encryption if the server requests it # # The default value is "IfRequested". # <Location /> Order Deny,Allow Deny From All Allow From 127.0.0.1 </Location> #<Location /classes> # # You may wish to limit access to printers and classes, either with Allow # and Deny lines, or by requiring a username and password. # #</Location> #<Location /classes/name> # # You may wish to limit access to printers and classes, either with Allow # and Deny lines, or by requiring a username and password. # #</Location> #<Location /printers> # # You may wish to limit access to printers and classes, either with Allow # and Deny lines, or by requiring a username and password. # #</Location> #<Location /printers/name> # # You may wish to limit access to printers and classes, either with Allow # and Deny lines, or by requiring a username and password. # ## Anonymous access (default) #AuthType None ## Require a username and password (Basic authentication) #AuthType Basic #AuthClass User ## Require a username and password (Digest/MD5 authentication) #AuthType Digest #AuthClass User ## Restrict access to local domain #Order Deny,Allow #Deny From All #Allow From .mydomain.com #</Location> <Location /admin> # # You definitely will want to limit access to the administration functions. # The default configuration requires a local connection from a user who # is a member of the system group to do any admin tasks. You can change # the group name using the SystemGroup directive. # AuthType Basic AuthClass System ## Restrict access to local domain Order Deny,Allow Deny From All Allow From 127.0.0.1 #Encryption Required </Location> # # End of "$Id: cupsd.conf,v 1.35 2001/07/25 21:03:32 mike Exp $". #
