On Fri, 31 Aug 2001, GECOS wrote: > John Kittel wrote: > > > > /var/log/ker.log has kernel entry > > parport0: pc-style at 0x378 [SPP,PS2] > > the kernel found the parallel port LPT1 > > modprobe -c has entry > > alias parport_lowlevel parport_pc > > /lib/modules/2.2.18pre21-compact/modules.dep > > has entry /*/*/parport.o and /*/*/parport_pc.0 > > modprobe parport and modprobe parport_pc > > and modprobe lp do not work because > > lptest 36 7 > /dev/lp0 still returns > > bash: /dev/lp0: No such device > > debian 2.2r3 will not run the printer > > will answer any questions. Please help > > John Kittel Thanks :-> > > > > reply to [EMAIL PROTECTED] > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > maybe IRQ needs "none" as in > (/etc)lilo.conf > . > . > . > append="parport0=0x378,none" > . > . > . > ??? > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > Sorry for the delayed response. Help appreciated. lilo is not installed. boot from loadlin. modconf for parport_pc parport0 with entry /dev/lp0 caused the message parport_pc parport0: PC-style at 0x378 [SPP,PS2] when boot kernel 2.2.18pre21-compact #1 The guess /dev/lp0 did not work. No lp so modprobe lp did not work. /usr/lib/modules_help/ is not present. Am looking to install /*/*/modules_help/. Debian 2.2r3 will not run the printer. Please respond with questions or comments. Thanks, John Kittel :->
reply to [EMAIL PROTECTED]
