Hello :o) Why will xsane not find my scanner?
It is a MUSTEK MFS 6000CX scanner that sits just nicely on my SCSI adapter. I have read the man pages for sane-mustek, sane-scsi, and xsane, and I must be missing something. I am running Potato release 3. This is my /etc/sane.d/mustek.conf: ---snip /etc/sane.d/mustek.conf--- # See sane-mustek(5) for documentation. option strip-height 1 scsi MUSTEK * Scanner option linedistance-fix option lineart-fix # lineart may be faster with this option off. scsi SCANNER option linedistance-fix option lineart-fix # lineart may be faster with this option off. /dev/scanner option linedistance-fix option lineart-fix # lineart may be faster with this option off. ---snip /etc/sane.d/mustek.conf--- This is my /proc/scsi/scsi: ---snip /proc/scsi/scsi--- Attached devices: Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: MUSTEK Model: MFS-06000CX Rev: 4.05 Type: Scanner ANSI SCSI revision: ffffffff Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: LITE-ON Model: LTR-12102C Rev: RS02 Type: CD-ROM ANSI SCSI revision: 02 ---snip /proc/scsi/scsi--- This is what find-scanner reports: ---snip find-scanner--- find-scanner: found scanner "MUSTEK MFS-06000CX 4.05" at device /dev/scanner find-scanner: found scanner "MUSTEK MFS-06000CX 4.05" at device /dev/sg0 ---snip find-scanner--- But this is what xsane says when I start it: ---snip xsane--- no devices available [Ok] ---snip xsane--- Can someone help? Best regards Johnny :o)
