hi ya george
the kernel... is raid0 and raid1 compatible...
with no modifications/patches needed ...
( just need to make sure raid in turned on in the kernel option
-- for raid5...you need some patches...depending on which kernel version
-- you cannot boot....bceause you only have /boot on raid1 from a prior
email... and the kernel in /boot cannot find anything else ( root fs )
-- haven't seen that lilo config... seems like it shoudl work... but
than again... i'd take out ( xxxx> ) all your disk info
c ya
alvin
On Thu, 2 Aug 2001, George Karaolides wrote:
>
> Could my problem be with lilo? I am running 21.5-1 beta (the stock
> lilo that comes with "potato"). Does anyone know whether this is
> RAID1-capable or not?
...
> > > /dev/md0 contains the /boot filesystem.
> > > /dev/md2 contains the / (root) filesystem.
> > >
> > > # Begin lilo.conf
> > >
xxxx> disk=/dev/md2
xxxx> bios=0x80
xxxx> cylinders=8761
xxxx> heads=64
xxxx> sectors=32
xxxx> partition=/dev/md0
xxxx> start=32
> > >
boot=/dev/md0
> > > map=/boot/map
> > > install=/boot/boot.b
> > > lba32
> > > prompt
xxxx> root=/dev/md2
> > > default=linux
> > >
> > > image=/boot/vmlinuz
> > > label=linux
> > > read-only
root=/dev/md2
> > > image=/boot/vmlinuz.old
> > > label=linux-old
> > > read-only
root=/dev/md2
> > >
> > > # End lilo.conf
> > >
