Hmmm... It doesn't look like it bails out on your video... How did you install X?
On Fri, Jul 13, 2001 at 08:34:31AM -0400, Walter Tautz wrote: > > > On Thu, 12 Jul 2001, Dmitriy Kropivnitskiy wrote: > > > On Mon, Jul 09, 2001 at 09:04:10AM -0400, Walter Tautz wrote: > > > > > > Thanks for the advice....alas the driver module r128_drv.o is complaining > > > about > > > unresolved symbols and I get a signal 11 from the Xserver... > > > -walter > > > > > > > I need some more info. What is your video card? What exact errors do you get > > ( paste from the X output ) > > > > -- > > Here is the lspci -v output > > > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF (prog-if > 00 [VGA]) > Subsystem: ATI Technologies Inc: Unknown device 0008 > Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 11 > Memory at e0000000 (32-bit, prefetchable) > I/O ports at d800 > Memory at df000000 (32-bit, non-prefetchable) > Expansion ROM at dffe0000 [disabled] > Capabilities: <available only to root> > > > XFree86.0.log file: > > > > > XFree86 Version 4.0.3 / X Window System > (protocol Version 11, revision 0, vendor release 6400) > Release Date: 16 March 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Operating System: Linux 2.2.19 i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jul 13 08:27:36 2001 > (==) Using config file: "/etc/X11/XF86Config-4" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (??) unknown. > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "CM751U" > (**) | |-->Device "ATI Rage 128" > (**) |-->Input Device "USB Mice" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc101" > (**) XKB: model: "pc101" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (**) FontPath set to > "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fon > > > ts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (WW) Cannot open APM > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.3 > XFree86 XInput driver : 0.1 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.2 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x800022c0, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card 1043,8024 rev 03 class 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 > (II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 > (II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 > (II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 > (II) PCI: 00:09:0: chip 1274,5880 card 1274,8001 rev 02 class 04,01,00 hdr 00 > (II) PCI: 00:0b:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00 > (II) PCI: 01:00:0: chip 1002,5246 card 1002,0008 rev 00 class 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set) > (II) Bus 1 I/O range: > [0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xdf000000 - 0xdfdfffff (0xe00000) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0xdff00000 - 0xe3ffffff (0x4100000) MX[B] > (II) Bus -1: bridge is at (0:4:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(1:0:0) ATI Rage 128 RF rev 0, Mem @ 0xe0000000/26, 0xdf000000/14, > I/O @ 0xd800/8 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E > (II) Active PCI resource ranges: > [0] -1 0xde800000 - 0xdeffffff (0x800000) MX[B]E > [1] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E > [2] -1 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) > [3] -1 0xdf000000 - 0xdf003fff (0x4000) MX[B](B) > [4] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) > [5] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]E > [6] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]E > [7] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]E > [8] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]E > [9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xde800000 - 0xdeffffff (0x800000) MX[B]E > [1] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E > [2] -1 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) > [3] -1 0xdf000000 - 0xdf003fff (0x4000) MX[B](B) > [4] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) > [5] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]E > [6] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]E > [7] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]E > [8] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]E > [9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xde800000 - 0xdeffffff (0x800000) MX[B]E > [6] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E > [7] -1 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) > [8] -1 0xdf000000 - 0xdf003fff (0x4000) MX[B](B) > [9] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) > [10] -1 0x00000000 - 0x000001ff (0x200) IX[B]E > [11] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]E > [12] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]E > [13] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]E > [14] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]E > [15] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.1.9 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.2 > (II) Loading font FreeType > (II) LoadModule: "r128" > (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o > (II) Module r128: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 4.0.1 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.3 > (II) LoadModule: "ati" > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o > (II) Module ati: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 6.2.3 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.3 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.1 > (II) ATI: ATI driver (version 6.2.3) for chipsets: ati, ativga > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (AGP), > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP) > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset ATI Rage 128 RF (AGP) found > (II) Loading sub module "r128" > (II) LoadModule: "r128" > (II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xde800000 - 0xdeffffff (0x800000) MX[B]E > [6] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E > [7] -1 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) > [8] -1 0xdf000000 - 0xdf003fff (0x4000) MX[B](B) > [9] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) > [10] -1 0x00000000 - 0x000001ff (0x200) IX[B]E > [11] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]E > [12] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]E > [13] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]E > [14] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]E > [15] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xde800000 - 0xdeffffff (0x800000) MX[B]E > [6] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E > [7] -1 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) > [8] -1 0xdf000000 - 0xdf003fff (0x4000) MX[B](B) > [9] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) > [10] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [13] -1 0x00000000 - 0x000001ff (0x200) IX[B]E > [14] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]E > [15] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]E > [16] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]E > [17] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]E > [18] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) > [19] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [20] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) R128(0): PCI bus 1 card 0 func 0 > (**) R128(0): Depth 16, (--) framebuffer bpp 16 > (II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps) > (==) R128(0): Default visual is TrueColor > (==) R128(0): RGB weight 565 > (II) R128(0): Using 6 bits per RGB (8 bit DAC) > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) R128(0): initializing int10 > (II) R128(0): Primary V_BIOS segment is: 0xc000 > (--) R128(0): Chipset: "ATI Rage 128 RF (AGP)" (ChipID = 0x5246) > (--) R128(0): Linear framebuffer at 0xe0000000 > (--) R128(0): MMIO registers at 0xdf000000 > (--) R128(0): BIOS at 0xdffe0000 > (WW) System lacks support for changing MTRRs > (--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 2:1) > (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=25000; xclk=6250 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) R128(0): initializing int10 > (II) R128(0): Primary V_BIOS segment is: 0xc000 > (II) R128(0): VESA BIOS detected > (II) R128(0): VESA VBE Version 2.0 > (II) R128(0): VESA VBE Total Mem: 16384 kB > (II) R128(0): VESA VBE OEM: ATI RAGE128 > (II) R128(0): VESA VBE OEM Software Rev: 1.0 > (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc. > (II) R128(0): VESA VBE OEM Product: R128 > (II) R128(0): VESA VBE OEM Product Rev: 01.00 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (II) R128(0): VESA VBE DDC supported > (II) R128(0): VESA VBE DDC Level 2 > (II) R128(0): VESA VBE DDC transfer in appr. 2 sec. > (II) R128(0): VESA VBE DDC read successfully > (II) R128(0): Manufacturer: SUN Model: 564 Serial#: 935243 > (II) R128(0): Year: 1999 Week: 51 > (II) R128(0): EDID Version: 2.1 > (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V > (II) R128(0): Sync: Separate Composite SyncOnGreen > (II) R128(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27 > (II) R128(0): Gamma: 2.80 > (II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) R128(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.605 > (II) R128(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.298 > (II) R128(0): Supported VESA Video Modes: > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): [EMAIL PROTECTED] > (II) R128(0): Manufacturer's mask: 0 > (II) R128(0): Supported Future Video Modes: > (II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 76 vid: 36993 > (II) R128(0): #1: hsize: 1152 vsize 921 refresh: 76 vid: 36977 > (II) R128(0): #2: hsize: 1280 vsize 1024 refresh: 67 vid: 34689 > (II) R128(0): #3: hsize: 1152 vsize 921 refresh: 66 vid: 34417 > (II) R128(0): #4: hsize: 1280 vsize 1024 refresh: 75 vid: 36737 > (II) R128(0): #5: hsize: 1024 vsize 768 refresh: 75 vid: 20321 > (II) R128(0): #6: hsize: 1280 vsize 1024 refresh: 76 vid: 36993 > (II) R128(0): #7: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 > (II) R128(0): Supported additional Video Mode: > (II) R128(0): clock: 135.0 MHz Image Size: 340 x 270 mm > (II) R128(0): h_active: 1280 h_sync: 1312 h_sync_end 1376 h_blank_end 1664 > h_border: 0 > (II) R128(0): v_active: 1024 v_sync: 1026 v_sync_end 1034 v_blanking: 1066 > v_border: 0 > (II) R128(0): Supported additional Video Mode: > (II) R128(0): clock: 108.0 MHz Image Size: 340 x 270 mm > (II) R128(0): h_active: 1152 h_sync: 1184 h_sync_end 1312 h_blank_end 1504 > h_border: 0 > (II) R128(0): v_active: 900 v_sync: 902 v_sync_end 902 v_blanking: 943 > v_border: 0 > (II) R128(0): Supported additional Video Mode: > (II) R128(0): clock: 117.0 MHz Image Size: 340 x 270 mm > (II) R128(0): h_active: 1280 h_sync: 1296 h_sync_end 1408 h_blank_end 1632 > h_border: 0 > (II) R128(0): v_active: 1024 v_sync: 1026 v_sync_end 1034 v_blanking: 1066 > v_border: 0 > (II) R128(0): Supported additional Video Mode: > (II) R128(0): clock: 94.5 MHz Image Size: 340 x 270 mm > (II) R128(0): h_active: 1152 h_sync: 1192 h_sync_end 1320 h_blank_end 1528 > h_border: 0 > (II) R128(0): v_active: 900 v_sync: 902 v_sync_end 906 v_blanking: 937 > v_border: 0 > (==) R128(0): Using gamma correction (1.0, 1.0, 1.0) > (II) R128(0): CM751U: Using hsync range of 30.00-92.00 kHz > (II) R128(0): CM751U: Using vrefresh range of 50.00-120.00 Hz > (II) R128(0): Clock range: 12.50 to 250.00 MHz > (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range) > (WW) R128(0): Default mode "1600x1200" deleted (hsync out of range) > (WW) R128(0): Default mode "1792x1344" deleted (bad mode > clock/interlace/doublescan) > (WW) R128(0): Default mode "1856x1392" deleted (bad mode > clock/interlace/doublescan) > (WW) R128(0): Default mode "1920x1440" deleted (bad mode > clock/interlace/doublescan) > (--) R128(0): Virtual size is 1280x1024 (pitch 1280) > (**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz > (**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz > (**) R128(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz > (**) R128(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz > (++) R128(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.1 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.3 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.0.3, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.3 > Symbol drmR128ResetCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StartCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128ResetCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StartCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128WaitForIdleCCE from module > /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved! > Symbol drmR128ResetCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StartCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StartCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StartCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StartCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > Symbol drmR128StopCCE from module /usr/X11R6/lib/modules/drivers/r128_drv.o > is unresolved! > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0xdf000000 - 0xdf003fff (0x4000) MS[B] > [1] 0 0xe0000000 - 0xe3ffffff (0x4000000) MS[B] > [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [7] -1 0xde800000 - 0xdeffffff (0x800000) MX[B]E > [8] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]E > [9] -1 0xdffe0000 - 0xdfffffff (0x20000) MX[B](B) > [10] -1 0xdf000000 - 0xdf003fff (0x4000) MX[B](B) > [11] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) > [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [15] 0 0x0000d800 - 0x0000d8ff (0x100) IS[B] > [16] -1 0x00000000 - 0x000001ff (0x200) IX[B]E > [17] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]E > [18] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]E > [19] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]E > [20] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]E > [21] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) > [22] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [23] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) R128(0): Memory manager initialized to (0,0) (1280,6553) > (II) R128(0): Reserved area from (0,1024) to (1280,1026) > (II) R128(0): Largest offscreen area available: 1280 x 5527 > (==) R128(0): Backing store disabled > (==) R128(0): Silken mouse enabled > (II) R128(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Dashed Lines > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 32 256x256 slots > 16 512x512 slots > (II) R128(0): Acceleration enabled > (II) R128(0): Using hardware cursor (scanline 2052) > (II) R128(0): Largest offscreen area available: 1280 x 5525 > (II) R128(0): Direct rendering disabled > (II) Setting vga for screen 0. > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (**) Option "Protocol" "IMPS/2" > (**) USB Mice: Protocol: "IMPS/2" > (**) Option "CorePointer" > (**) USB Mice: Core Pointer > (**) Option "Device" "/dev/input/mice" > (**) Option "Buttons" "5" > (**) USB Mice: Buttons: 5 > (**) Option "Emulate3Buttons" > (**) USB Mice: Emulate3Buttons, Emulate3Timeout: 50 > (**) Option "ZAxisMapping" "4 5" > (**) USB Mice: ZAxisMapping: buttons 4 and 5 > (II) Keyboard "Keyboard1" handled by legacy driver > (II) XINPUT: Adding extended input device "USB Mice" (type: MOUSE) > Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing > from list! > > Fatal server error: > Caught signal 11. Server aborting > > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > > > XF86Config-4 file: > > > > > # File generated by xf86config. > > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > > # This loads the DBE extension module. > > Load "dbe" # Double buffer extension > > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > > # This loads the Type1 and FreeType font modules > Load "type1" > Load "freetype" > > # This loads the GLX module > # Load "glx" > > EndSection > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > # FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > # The module search path. The default path is shown here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # Option "NoTrapSignals" > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # Option "DontZap" > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # Option "Dont Zoom" > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # Option "DisableVidModeExtension" > > # Uncomment this to enable the use of a non-local xvidtune client. > > # Option "AllowNonLocalXvidtune" > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # Option "DisableModInDev" > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # Option "AllowNonLocalModInDev" > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > Identifier "Keyboard1" > Driver "Keyboard" > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > > # Option "Protocol" "Xqueue" > > Option "AutoRepeat" "500 30" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > # Option "XkbRules" "xfree86" > # Option "XkbModel" "pc101" > # Option "XkbLayout" "us" > # Option "XkbVariant" "" > # Option "XkbOptions" "" > > # Option "XkbDisable" > > Option "XkbRules" "xfree86" > Option "XkbModel" "pc101" > Option "XkbLayout" "us" > > EndSection > > > # ********************************************************************** > # Core Pointer's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > # Identifier and driver > > Identifier "USB Mice" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Buttons" "5" > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > > # Option "Protocol" "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice. In > # almost every case these lines should be omitted. > > # Option "BaudRate" "9600" > # Option "SampleRate" "150" > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" > > # ChordMiddle is an option for some 3-button Logitech mice > > # Option "ChordMiddle" > > EndSection > > > # ********************************************************************** > # Other input device sections > # this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the XF86Config man page for a description of the options. > # ********************************************************************** > # > # Section "InputDevice" > # Identifier "Mouse2" > # Driver "mouse" > # Option "Protocol" "MouseMan" > # Option "Device" "/dev/mouse2" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball" > # Driver "magellan" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball2" > # Driver "spaceorb" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen0" > # Driver "microtouch" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "1412" > # Option "MaxX" "15184" > # Option "MinY" "15372" > # Option "MaxY" "1230" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen1" > # Driver "elo2300" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "231" > # Option "MaxX" "3868" > # Option "MinY" "3858" > # Option "MaxY" "272" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonThreshold" "17" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > > # ********************************************************************** > # Monitor section > # ********************************************************************** > > # Any number of monitor sections may be present > > Section "Monitor" > > Identifier "CM751U" > > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > HorizSync 30-92 > > # HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies > > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > VertRefresh 50-120 > > EndSection > > > # ********************************************************************** > # Graphics device section > # ********************************************************************** > > # Any number of graphics device sections may be present > > # Standard VGA Device: > > Section "Device" > Identifier "Standard VGA" > VendorName "Unknown" > BoardName "Unknown" > > # The chipset line is optional in most cases. It can be used to override > # the driver's chipset detection, and should not normally be specified. > > # Chipset "generic" > > # The Driver line must be present. When using run-time loadable driver > # modules, this line instructs the server to load the specified driver > # module. Even when not using loadable driver modules, this line > # indicates which driver should interpret the information in this section. > > Driver "vga" > # The BusID line is used to specify which of possibly multiple devices > # this section is intended for. When this line isn't present, a device > # section can only match up with the primary video device. For PCI > # devices a line like the following could be used. This line should not > # normally be included unless there is more than one video device > # intalled. > > # BusID "PCI:0:10:0" > > # VideoRam 256 > > # Clocks 25.2 28.3 > > EndSection > > # Device configured by xf86config: > > Section "Device" > Identifier "ATI Rage 128" > Driver "r128" > #VideoRam 4096 > # Insert Clocks lines here if appropriate > EndSection > > > # ********************************************************************** > # Screen sections > # ********************************************************************** > > # Any number of screen sections may be present. Each describes > # the configuration of a single screen. A single specific screen section > # may be specified from the X server command line with the "-screen" > # option. > Section "Screen" > Identifier "Screen 1" > Device "ATI Rage 128" > Monitor "CM751U" > DefaultDepth 16 > > Subsection "Display" > Depth 8 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > EndSection > > # ********************************************************************** > # ServerLayout sections. > # ********************************************************************** > > # Any number of ServerLayout sections may be present. Each describes > # the way multiple screens are organised. A specific ServerLayout > # section may be specified from the X server command line with the > # "-layout" option. In the absence of this, the first section is used. > # When now ServerLayout section is present, the first Screen section > # is used alone. > > Section "ServerLayout" > > # The Identifier line must be present > Identifier "Simple Layout" > > # Each Screen line specifies a Screen section name, and optionally > # the relative position of other screens. The four names after > # primary screen name are the screens to the top, bottom, left and right > # of the primary screen. In this example, screen 2 is located to the > # right of screen 1. > > Screen "Screen 1" > > # Each InputDevice line specifies an InputDevice section name and > # optionally some options to specify the way the device is to be > # used. Those options include "CorePointer", "CoreKeyboard" and > # "SendCoreEvents". > > InputDevice "USB Mice" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > > EndSection > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- Life is what happens to you while you are planning to do something else.
