Hi, the VGA16 seems not to work correctly when I start it via startx or
XF86Setup. The server gives the following output and displays a coloured
pattern:
" XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
VGA16: server for 4-bit colour VGA (Patchlevel 0):
ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c,
ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
ET4000W32p_rev_d, ET6000, ET6100, et3000, ncr77c22, ncr77c22e,
ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
oti067, oti077, oti087, oti037c, cl6410, cl6412, cl6420, cl6440,
generic
MONO: server for interlaced and banked monochrome graphics adaptors
(Patchlevel 0):
hgc1280, sigmalview, apollo9, hercules
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(de)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) VGA16: Graphics device ID: "S3 86C765 (Trio64V+)"
(**) VGA16: Monitor ID: "My Monitor"
(--) VGA16: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) VGA16: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) VGA16: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) VGA16: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/cyrillic/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/cyrillic/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) VGA16: PCI: S3 Trio32/64 rev 84, Memory @ 0xe0000000
(--) VGA16: chipset: generic
(--) VGA16: videoram: 256k (using 256k)
(**) VGA16: clocks: 25.18 28.32 25.18 40.28
(--) VGA16: Maximum allowed dot-clock: 90.000 MHz
(**) VGA16: Mode "640x480": mode clock = 25.175, clock used = 25.180
(**) VGA16: Mode "800x600": mode clock = 40.000, clock used = 40.280
(**) VGA16: Virtual resolution set to 800x600
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb
-xkm -m de -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp
"> " -eml "Errors from xkbcomp are not fatal to the X server"
keymap/xfree86 compiled/xfree86.xkm' "
What am I doing wrong?
P.S.:I use Debian 2.2 r2.
