Greetings again -
Still trying to get my second PCMCIA network card up and running. I
managed to compile cs89x0_cs and get it installed right. I've verified
that the card is visible to cardmgr:
achebe:/etc/pcmcia# cardctl ident
Socket 0:
product info: "3Com Corporation", "3C589", "TP/BNC LAN Card Ver. 2a",
"000002"
manfid: 0x0101, 0x0589
function: 6 (network)
Socket 1:
product info: "IBM", "EtherJet PC Card", "Version U10", "Card Assy
Part Number - 85H4801"
manfid: 0x00a4, 0x003f
function: 6 (network)
I've set up /etc/pcmcia/network.opts like this:
case "$ADDRESS" in
*,0,*,*)
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT="10baseT"
# Use /sbin/pump for BOOTP/DHCP? [y/n]
PUMP="n"
# Host's IP address, netmask, network address, broadcast address
IPADDR="192.168.0.11"
NETMASK="255.255.255.0"
NETWORK="192.168.0.0"
BROADCAST="192.168.0.255"
GATEWAY="192.168.0.3"
DOMAIN="perrins"
DNS_1="152.2.21.1"
DNS_2="128.32.93.7"
DNS_3="128.32.93.8"
;;
*,1,*,*)
# Host's IP address, netmask, network address, broadcast address
IPADDR="x.x.x.x"
NETMASK="x.x.x.x"
BROADCAST="x.x.x.x"
GATEWAY="x.x.x.x"
DOMAIN="telocity.net"
DNS_1="216.227.49.37"
DNS_2="216.227.49.38"
DNS_3="152.2.21.1"
;;
esac
But when I do killall -HUP cardmgr, the IBM adapter doesn't load right.
The error is "Device or resource busy":
May 24 11:42:57 achebe cardmgr[2209]: socket 1: IBM EtherJet Ethernet
Adapter
May 24 11:42:57 achebe cardmgr[2209]: executing: 'insmod
/lib/modules/2.2.17/pcmcia/cs89x0_cs.o'
May 24 11:42:57 achebe cardmgr[2209]: +
/lib/modules/2.2.17/pcmcia/cs89x0_cs.o: init_module: Device or resource
busy
May 24 11:42:58 achebe cardmgr[2209]: + Hint: this error can be caused
by incorrect module parameters, including invalid IO or IRQ parameters
May 24 11:42:58 achebe cardmgr[2209]: insmod exited with status 1
May 24 11:42:58 achebe cardmgr[2209]: executing: 'modprobe cs89x0_cs'
May 24 11:42:58 achebe cardmgr[2209]: + modprobe: Can't locate module
cs89x0_cs
May 24 11:42:58 achebe cardmgr[2209]: modprobe exited with status 255
May 24 11:42:59 achebe cardmgr[2209]: get dev info on socket 1 failed:
Resource temporarily unavailable
I get the same response when I manually do an insmod cs89x0_cs. Any
advice?
Thanks.
--
--------------------------------------------------------------
Andrew J. Perrin - Programmer/Analyst, Desktop Support
Children's Primary Care Research Group, UNC - Chapel Hill
(919)966-9394 * [EMAIL PROTECTED]
