ยป ktb disse isso e eu digo aquilo:
> On Mon, May 14, 2001 at 02:33:02PM -0300, [EMAIL PROTECTED] wrote:
> > hello people, i need to configure the X-windows.
> > i try with XF86Setup but i don't configure the mouse, how i do?
>
> What type of mouse do you have? If it is ps/2 use /dev/psaux
> in /etc/X11/XF86Config for example -
> Section "Pointer"
> Protocol "PS/2"
> Device "/dev/psaux"
>
>
> Also if it is jumping around try killing gpm the console mouse server
> and see if that helps -
> # /etc/init.d/gpm stop
>
> If you want to run both at the same time there is lots of info on that
> in the archives which can be searched at the deb web-site or
> http://www.geocrawler.com/lists/3/Debian-Linux/199/0/
> kent
To run the mouse using both gpm and XFree, do two things:
1) Tell gpm to use repeat rate ms3;
2) Set your XFree mouse protocol to IntelliMouse and set the
mouse device to /dev/gpmdata (don't know if it works for other protocols).
--
[]'s
francisco m. neto
(a.k.a Fujikuro)
ICQ # 78493934
"Toke au kokoro ga, watashi o kowasu."
-- Ayanami Rei
