Try changing your netmasks to 255.255.0.0 -Jason
*********** REPLY SEPARATOR *********** On 18/03/00 at 4:54 PM Thomas Braun wrote: >hello group, > > >i have two nic's in one debian computer, >and i want to reach both networks over a router and from the subnet. > >the first nic has the 192.168.4.194 and the second 192.168.2.194. > >my router has in the first network 192.168.2.1 and in the second >192.168.4.1. > >my config is > >iface eth0 inet static > address 192.168.2.194 > netmask 255.255.255.0 > network 192.168.2.0 > broadcast 192.168.2.255 > >iface eth1 inet static > address 192.168.4.194 > netmask 255.255.255.0 > network 192.168.4.0 > broadcast 192.168.4.255 > gateway 192.168.4.1 > >up route add -net 192.168.2.0 netmask 255.255.255.0 gw \ 192.168.4.1 dev >eth1 >down route del -net 192.168.2.0 netmask 255.255.255.0 gw \ 192.168.4.1 >dev eth1 > >up route add -net 192.168.4.0 netmask 255.255.255.0 gw \ 192.168.2.1 dev >eth0 >down route del -net 192.168.4.0 netmask 255.255.255.0 gw \ 192.168.2.1 >dev eth0 > >but i can only reach 192.168.4.194 from the subnet 192.168.2.0/24 >but from the network 192.168.4.0/24 can i reach the 192.168.4.194 but >not the 192.168.2.194. > >the nic has no problem i see that packet comming to the nic with ngrep . > > >im using the stabel version 2.2. > >and i have one 3com and a intel nic in this computer. > >drivers are >intel =eepro100 >3com =3c59x > >can anyone help me or explain me that? > > >cu thomas. > > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
