I was thinking it could be a termination issue, but I have a terminator on the last connector of the cable. The setup (which was working before a drive went) was thus: drive 1, drive 2, terminator (active, I believe). Drive 2 is the one that died so there is a non- used connector between the terminator and drive 1. The drives are SCA-2 drives, so I have to use an adapter and actual terminator since the drives do not appear to be self-terminating. Would that unused connector between drive 1 and the terminator be the problem?
Rob > <cut a lot of text> > > Which scsi unit in the chain terminates the scsi chain? In my experience > it is a jumper setting on scsi devices in pc parts. The last device on > the chain has to be terminated. I've booted and run whithout termination > but the system were very strange (ie a scsi cd-rom dissapeared). > > This was the best url I found with just skimming through it. > > http://www.wdc.com/products/drives/drivers-ed/scsiterm.html > > Bjarne >
