----- Original Message ----- From: "virtanen" <[EMAIL PROTECTED]> To: "Hall Stevenson" <[EMAIL PROTECTED]> Cc: "Debian User List" <debian-user@lists.debian.org> Sent: Wednesday, February 07, 2001 11:33 AM Subject: Re: HP 9100 series cd -writer?
> Didn't find any clue yet, what to do. > Still nothing happens. > For most of the time 'xcdroast' command is > answering: > > 'No Generic SCSI-Support has been detected.' > (Anyway there are the modules sg and ide-sci emulation installed.) > > From dmesg: > ___________ > > hdc: Hewlett-Packard CD-Writer Plus 9100b, ATAPI CDROM drive > hdd: CD-ROM 48X/AKU, ATAPI CDROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: IBM-DTLA-307030, 29314MB w/1916kB Cache, CHS=3737/255/63 > hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.11 > hdd: ATAPI 48X CD-ROM drive, 128kB Cache > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 > scsi: <fdomain> Detection failed (no card) > NCR53c406a: no available ports found > sym53c416.c: Version 1.0.0 > Failed initialization of WD-7000 SCSI card! > IBM MCA SCSI: No Microchannel-bus support present -> Aborting. > megaraid: v107 (December 22, 1999) > aec671x_detect: > 3w-xxxx: tw_findcards(): No cards found. > scsi : 0 hosts. > scsi : detected total. > Partition check: > > ___________ > > /etc/modules is as follows: > > eepro100 > 3c59x > 3c59x > parport > parport_pc > parport_probe > sg > ide-scsi > > _______________ > > [EMAIL PROTECTED] > > > On Wed, 7 Feb 2001, Hall Stevenson wrote: > > > > 1) > > > Has anyone succesfully used > > > > > > HP cd-writer 9100i (IDE) > > > > I have the 9150i model... probably close enough. > > > > > > > xcdroast > > > Debian 2.2. (potato) > > > > > > combined to burn cds? > > > > > > My brand new machine has got the above combination > > > and I cannot setup xcdroast. xcdroast setup doesn't > > > seem to see the cdwriter as a writer at all. > > > > > > On the kernel there are installed ide-sci and sg modules > > > Any clue, where the problem is? > > > _______________ > > > > > > 2) How to use instead cdrecord program (if xcdroast > > > doesn't work) to copy cds? > > > > > > My burner is /dev/hdc and there is another cddriver > > > at /dev/hdd > > > > Sounds like it's a scsi-emulation problem. There's likely nothing wrong > > with your cd-writer or the software you're using. xcdroast, I believe, > > uses cdrecord on the back-end, so if xcdroast doesn't work, cdrecord > > probably won't either. > > > > This link, http://www.xcdroast.org/xcdr098/faq-a8.html#2, may help you > > out. > > > > Regards > > Hall > >
