Hi, if you really need to change pci irq's (for example in combination with isa cards), you can try to put the (pci)cards in a different order in your pci slots. You can also look in the bios and try to change irq-channels. (I belive it was IRQ #A and IRQ #B or something).
A little of what I know about pci and irq's: there are a couple of irq lines, each line connected to two(?) pci slots. So putting the card in a different slot might change the irq. Also the combination of the cards may have influence on the bios' irq settings. Greetz, Sebastiaan On Fri, 26 Jan 2001, Fernando Carvajal wrote: > > > does anyone know how can i change irq number for a soundblaster Live 1024 > soundcard that uses the Alsa emu10k1 driver ? On booting it set IRQ 10 that > it's shared with my ethernet card. > In modules.conf i set options snd_irq=5; but if i do a cat /proc/interrupts > i see IRQ 10 or so it seem. > > > Thanks > > > --------------------------------------- > Jose Fernando Carvajal Vión > SOLUZIONA Software Factory > Servicios Profesionales de Unión Fenosa > C/ Pedro Teixeira, 8 - 28020 Madrid > Teléfono: +34 91 555 33 61 Fax: +34 91 597 05 62 > mailto:[EMAIL PROTECTED] > http://www.uf-isf.es > > --------------------------------------- > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
