Mike wrote:
> > Here's his problem:
> >
> > > > 2. Added append="hdd=ide-scsi" to my /etc/lilo.conf
> > ^^^^^^^^^^^^
> > Should just be "hdd=scsi". Search for "=scsi" in
> > linux/Documentation/Configure.help for more info.
>
> Uhh, you sure about that?
Argh, RTFM! I even told you where to look!
Configure.help: "You must then provide the kernel command line
"hdx=scsi" [...] for devices if you want the native EIDE sub-drivers to
skip over the native support, so that this SCSI emulation can be used
instead."
Also, my own configuration is proof that this works:
$ dmesg
Linux version 2.4.0 ([EMAIL PROTECTED]) (gcc version 2.95.2 20000220 (Debian
GNU/Linux)) #1 SMP Thu Jan 4 22:31:09 PST 2001
[...]
Kernel command line: auto BOOT_IMAGE=linux ro root=302
BOOT_FILE=/boot/linux-2.4.0 ether=0,0,2,eth0 hde=scsi parport=0x378,7
ide_setup: hde=scsi
[...]
hda: Maxtor 96147H8, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-6502B, ATAPI CDROM drive
hde: YAMAHA CRW4416E, ATAPI CDROM drive
hdg: Seagate STT20000A, ATAPI TAPE drive
[...]
hda: 120060864 sectors (61471 MB) w/2048KiB Cache, CHS=7473/255/63, UDMA(33)
hdc: ATAPI 40X CD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-cd: passing drive hde to ide-scsi emulation.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[...]
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: YAMAHA Model: CRW4416E Rev: 1.0f
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
root:~# cdrecord -scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'YAMAHA ' 'CRW4416E ' '1.0f' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
