Ciao, I have an HP ScanJet 6300C (USB) I have installed 2.4.0-test12 kernel with all the update program in unstable (modutils ...) and compiled into the kernel usb support, usb fs, OHCI (I have an AMD-756 USB Controller on a AMDK7 cpu) and USB scanner support.
dmesg says: usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xe0802000, IRQ 10 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-756 [Viper] USB usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF c18f9c80, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB OHCI Root Hub SerialNumber: e0802000 hub.c: USB hub found hub.c: 4 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RRRR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c18f9c80 usb.c: call_policy add, num 1 -- no FS yet usb.c: registered new driver usbscanner scanner.c: USB Scanner support registered. hub.c: port 1 connection change hub.c: port 1, portstatus 101, change 1, 12 Mb/s hub.c: port 1, portstatus 103, change 10, 12 Mb/s hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: kmalloc IF c18f9f80, numif 1 usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 usb.c: USB device number 2 default language ID 0x409 usb_control/bulk_msg: timeout Product: HP ScanJet 6300C SerialNumber: SG9AK171S8PE usb.c: usbscanner driver claimed interface c18f9f80 usb.c: kusbd: /sbin/hotplug add 2 usb.c: kusbd policy returned 0xfffffffe but /proc/bus/usb is empty. What can I do? I've look at www.linux-usb.org but in debian there isn't any USBD daemon or init script. (I've olso installed usbutils & usbview) On www.debianhelp.org there is an anonymous that says that USB is not a problem, but he doesn't tell how! :-( TNX. (any USB-ON-DEBIAN.HOWTO out there ?) -- Paolo Pedaletti, Como, ITALYa www.fastflow.it/~paolop [EMAIL PROTECTED] ICQ: 4755831
