Here is the situation: I have a laptop with wireless, and a desktop with wireless and regular ethernet.
Lets call the desktop machine A. A has eth0 (ethernet to the rest of the world), and eth1 (10.0.10.1, in an adhoc wireless with the laptop) Let the laptop be machine B, with only eth1, 10.0.10.2. Let there be a machine C, which is the gateway to the world that is sitting on the network which machine A's eth0 is part of. What I want to do is get machine B's packets through to machine C. Ideally, machine B would have a realworld ip -- a setup where machine A listened for 2 real ips, and forwarded all packets for one out over its eth1 on the 10.0.10.* network. However, I will settle for the easiest solution which allows machine B to be on the network. I've read a million howto's, and I had a setup working a few months ago, but it was doing so masqurading. Curretly, nothing works. The current, relavent info (I think) is thus: leko:/home/aarons#route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.0.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.0.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.0.1.1 0.0.0.0 UG 1 0 0 eth0 leko:/home/aarons#ipchains -L Chain input (policy ACCEPT): Chain forward (policy ACCEPT): target prot opt source destination ports MASQ all ------ 10.0.0.0/8 anywhere n/a MASQ all ------ anywhere 10.0.0.0/8 n/a Chain output (policy ACCEPT): This doesn't work. One thought I had was creating a eth0.1 on machine A with the global ip of machine B, then have it forward all packets from that interface over to eth1, and vice versa. This seems to me like it wouldn't be that hard, but I don't know what I'm talking about. Any help appreciated. Please CC all replies to me. -Aaron Solochek [EMAIL PROTECTED]
